CF(compact flash) to 3. 5"IDE adapter for desk PC: 40P female
|
40PIN FEMALE CF To IDE(IDE-CF) Adapter is an adapter for connecting a compact flash memory card to a 3. 5'' host interface, aiming at educational sectors, IT development, and the embedded technology enthusiast to enable the use of a compact flash card as an IDE hard drive.. Designedto plug directly into the IDE port of any processor board, the small form factor of this adapter can be easily mounted inside any system. | |
|
Specification & Features | |
| > |
Support single CF in this adapter |
| > |
Very helpful for embedded system designers and engineers |
| > |
No driver required |
| > |
Master / Slave mode selection |
| > |
Male , 40-pin IDE connector with 4-pin power connector on-board |
| > |
You can boot from Dos/Windows/Linux with CF, same as IDE hard drives, but much faster Master/Slave jumper , with DMA MODE, support CFI/CFII cards |
| > |
Power input: +5V, floppy disk Drive power connector |
DATASHEET:
| Interface: | 40-pin IDE 3. 5" | |||
| Supported media | Type I/II CF and MicroDrive | |||
| Maximum Read / Write Speed: | Depends on the media | |||
| OS Support: | DOS, Windows 3. 1, NT, 98SE, Me, 2000, XP, Vista, Mac OS 8. 6 or higher, Linux | |||
| Dimensions: | (W x D x H) - 44 x 18 x 61 mm for 40-pin IDE | |||
| Power: | +5V from PC power supply | |||
| Storage Temperature: | -20 °C to + 60 °C | |||
| Storage Humidity: | 5 - 90% | |||