Description:
Vehicle type key matches:
I. Programme Car Keys
1. TOYOTA Keys
2. Mazda Keys and China Make Car's Key
3. Tool Box Function
II. Copy Transponder Key
1. Identify most of the transponder key, may identify the 8C transponder.
2. Copy 13, 33, 42, 4C, 4D transponder
I. Programme Car Keys
1. Supports Toyota keys including all Toyota 4C, the 4D key, directly writes
Key data security to computer, processes automatically analyses, automatic
Computation, automatic check, matches several keys and only needs a
Matter of seconds to complete.
Resets all the Toyota security primary data, even if data loss it's possible
That you may completely repair.
1.1 Uses the 4C chip the security system: 93C56, 93C66, if the
Security code chip is 93C56, generally its location is inside engine ECU,
And is coloured brown. Like Camry and COROLLA
Camry??￥s security code chip on electric circuit board marking is IC601,
Corolla??￥s is IC900.
This also has picture Toyota 4,700, the TOYOTA Avalon,
Luxes series and so on also mostly is the 93C56 code chip,
But a minority of vehicles has the 93C66 code piece,
Also some vehicle types have the 93C86 code chip,
Like new style Toyota Previa. Also some vehicles use independent
Security box 93C66, such as American style LS400 1997,
And American and European style 4700.
1.2 Later models use the 4D in the security system:
Uses the 4D chip the vehicle type all to have an independent security box,
Called ECU, IMMOBILIZER, the code generally is 89780-XXXXX,
The code piece is 93LC66.
1.3 Remove the coded security chip from the immobiliser box or engine ecu.
Once removed from circuit board, after it has been cleaned with
An electrical contact cleaner place the chip in the adapter and connect the module.
Following screen prompts to operate it.
Altogether you may match 2-3 host keys and a slave key;
If the equipment prompt reads in successful, then completes retro cedes,
If screen reads : cannot find XX chip, This could be caused by the security
Chip not being cleaned or the chip is not attached or aligned in clamp well,
Please carefully inspect, The chip must be reliably connected.
1.4 On completion and key programming, solder the security chip back
To the p.c.B (computer board), providing you have followed the instructions and
Reattached the chip correct, the keys will now start the automobile.
1.5 Data initialization:
This function provides the majority of Toyota vehicles from the primary data,
Prepares them for use.
2. Mazda 6 (adapts Mazda 6 2.0 and 2.3 vehicle types, are automatically
Study the key, the Mazda 6 security systems in engine ECU; Mazda 5 security
Systems in measuring appliance, code piece L56R):
2.1 Mazda 6, 5 vehicles use the 4D TP01 chips, the security code piece divides
Into 24C02, 93C56 and 93A66, after choosing the good corresponding code
Piece and matching to the key and the quantity, and after the equipment prompt:
Reads ???Successful" solder the code piece to engine ECU.
With every new key place into ignition and turn key to position II,
After three seconds:
"CHECK" the lamp extinguishes, after then programme additional
Keys in the same way.
2.2 Toolbox function:
In sets at each M6 vehicle type primary data and "repositions the key"
The function; the primary data prepares the use, and repositions the key"
The function, after it removes the original vehicle key it can participate to study,
The original vehicle key can then be re-used.
2.3 China Domestically produced cars:
2.3.1 Uses 13 chips, if an original key.
You may use the equipment in the copy function, uses 13 chips copies to T5 inside.
If all keys have been lost, then use the equipment to be allowed to match a key.
If you require more keys then you just continue to use copy function,
Making sure you retain the original keys ID code on screen.
After copying all the keys you require, be sure to check that all keys carry
The same ID codes. Any with missing numbers, letters, or incorrect codes
Will fail to start the automobile.
2.3.2 At present uses the MOTOROLA chip this machine does not provide
The key match function.
2.3.3 Southeast Models: The function equates the 4S station instrument,
May match, southeast the deletion models chip key and the remote control.
2.3.4 TERIOS type: Uses the 4C chip, the code piece is 93C66,
Needs unsolder and solder the code piece, may simultaneously match 2
The host key and 1 slave key.
II. Identify and Copying functions:
1. Recognises a majority of transponder chip types, the unit can
Distinguish the 8C chip.
2. Can the copy 13, 33, 42, chip key and so on 4C, 4D. Among them,
13, 33, 42, 4C and so on may the direct copy 4C chip, support SILCA,
KLINE and our electronic 4C chip; The 4D copy must calculate the password.
With "copy 4D "the function, the read-out 12 letters or the digital transmissions,
After it provides the password, after the user writes in the password the
Copy to electronic 4D, if the copy is successful, then this duplicates successfully
The key, may use; If demonstrated "the copy failed??à, possibly is the
Password not to either the electronic 4D chip electricity or the breakdown,
Needs to replaced.
Core prompt: When makes 42, the 4D copy, after inputs PASSWORD please
Do not put aside the original key, only when the instrument prompt "inserts
The new blank key", can put aside the original key, after inserts the new key
Then carry on the copy.
Supplemented: When copy 4D key, first installs in
Nissan 4D Server SETUP.EXE software, after the instalment run the
Nissan 4D.Exe software, after choice correct COM, then uses the USB line
To connect IMMOPRO; Chooses the 4D copy, inserts the key press ENER,
In the normal condition the instrument can demonstrate "Connecting",
After several seconds instruments can demonstrate "please insert the blank key
And press ENTER", indicated the password already calculated completes,
Was allowed to use electronic 4D to carry on the copy;
If the instrument appears 12 numerals, indicated the PC machine CAN NOT
Calculate the password, need to send the 12 numbers to us, After getting the
Password from us, input the password to the programmer to finish the copy.
After inputs Password , the PC can save the 12 number and password into
The software automatically for next time use.
USB Connection: you must first install the IMMKEY-PRO driver,
Only after the PC computer prompt installs successfully may connect the USB line.