HD -WZJ-V Bending machine, the slide way of the cutting machine is using the square slider from Japan, with accurate cutting, can goes back and forth freely, The retainer plate is easy to use and can be adjusted conveniently.

 Main Technical Date:

 1 .only makes the cutting use.

 2. Cut material from both sides at the same time. Cut any angle from 45°and 135°in the front. Slot and cut on the back.

 3. Machinable the characters in size from 15cm to 2m range.

4. The width profile: 88mm, 128mm

5. The fastest speed: every five minutes

6. Voltage: 220volts

7 .the total weight: 125kg

8. Size: length* width*height 1.2*0.6*0.7m

HD –SK –III:

1.       Can make stainless steel, iron channel letter. Any letter from is available.

2.       Automatically feed the material into the machine. Automatically slot. Automatically bend and round, the minimum diameter of bending is o.7 mm

3.       High speed. using Servo motor to control the machine, only takes 34 seconds to fabricate one 30cm channel letter like "S”

4.       Shape any letter in one time, no necessary to make the acrylic cap particularly.

5.        Energy saving. Total power 1000w. Actual service power less than 700w

6.        Can read any vector file such as dxf, aifile which matching with the engraving file.

7.       Can make any specification requested by customers.