EIT201 Supports 3-way conference distinctive ring tone, full duplex hand-free and provides two 100Mbps Ethernet ports which are used for route and bridge. It is convenient to view in-call and out-call.
Key Features & Applications:
l Voice Codec: G.711, G723.1, G.729 A/B,ADPCM, ILBC
l Voice Activity Detection (VAD) with CNG (comfort noise generation) PLC (packet loss concealment) Dynamic JitterBuffer
l WEB/Telnet Configuration
l PPPOE,DHCP Client/Server
l Call hold
l Call Waiting
l Call Forward
l Do not disturb
l Direct IP calling
l Blind transfer
l Attended transfer
l 3-Way Conference
l Voice mail
|
Interfaces |
|
|
Network interface |
2*10M/100MBPS auto-sensing RJ45 Porst |
|
LED indicators |
Message waiting Indicator |
|
Voice, Modem |
|
|
Voice over packet Capabilities |
G.168 with 32, 64 or 128 ms tail length |
|
Voice Compression |
G.711, G723.1, G.729 A/B,ADPCM, ILBC |
|
DHCP Client/Server |
NAT Router or Switched Mode |
|
Qos |
DiffServe,TOS, 802.1P/Q VLAN tagging |
|
IP Transport |
RTP/RTCP & PPPOE |
|
Signaling |
|
|
DTMF Method |
RFC 2833, SIP Info, H323 Event |
|
IP Signaling |
SIP(RFC 3261)over UDP |
|
Provisioning |
TFTP,HTTP |
|
Security |
|
|
Management |
Syslog, WEB browser, Telnet, Voice prompt |
|
Physical |
|
|
Universal Power Supply |
Output:12VDC, input::100-240VAC/50Hz |
|
Dimensions |
190mm×170mm×100mm |
|
Weight |
0.7kg |
|
Temperature |
32-104° For 0-40°C |
|
Humidity |
10%-90% |
|
Additional Features |
|
|
Caller ID |
Bellcore Type 1 & 2, ETSI,BT,NTT, and, DTMF-based CID |
|
Polarity Reversal/Wink |
Yes |
|
Homologation |
|
|
Safety |
UL |
|
Compliance |
FCC ,CE |