YCL SERIES HEAVY-DUTY SINGLE-PHASE CAPACITOR STARTS AND RUN ASYNCHRONOUS MOTORS:

1.       In conformity with IEC standard

2.       Utilize IP 44 enclosures

3.       Utilize Vacuum impregnated Class B insulation, Class F insulation on request

4.       Voltage 220/240V

5.       Frequency 50Hz, 60Hz is available on request

6.       Motors are made with IC 0141 cooling

7.       Low operating temperature

8.       Motors made for continuous S1 duty

9.       Superior appearance, with new design in entirety

10.   Made of selected quality raw material cast iron frame, end shields and base

11.   Mounting arrangements B3, B5 and B35

12.   High performance, little vibration and low noises

13.   Compact, steady running

14.   Be maintained very conveniently, safety and reliable operation

15.   Electricity saving, superior life

16.   Water resistant, dust resistant, vermin resistant and corrosion resistant

17.   Low start current and EMC interference

18.   These motors can be widely applications in all type of small machine tools, compression pumps, water pumps, refrigerators and some equipment which need bigger starting torque, etc. especially for family workshop where only single-phase power is     available.

19.   Compared with YC series motor of same output the thermal rise and starting current of YCL series motor on the average are reduced by 8.74K and 18.1A respectively. In the average, the efficiency go up by 4.21%, max-torque increase by 0.064, min-torque by   0.408, starting torque by 0.348 and power factor by 0.16.