1. Rolling Key :Is fitted in the two parts of EN-34 alloy steel duty tempered and property ground and give a perfect service. All are being taken that the key may not break and is suitable to stand the jerks.
2. Alignment : Heighest degree of precision maintained during the fitting of ram and it's base is checked very property on 90 angel with the dail indicator. Horizontally & Perpendicularly.
3. Body : The press bodies are manufactured out of the close grain casting and steel fabricated as well.
Note : Above specifications may change without notice towards the improvements in products.
|
Capacity in tons |
10 tons |
20 Tons |
30 Tons |
50 Tons |
75 Tons |
100 Tons |
150 Tons |
200 Tons |
250 Tons |
300 Tons |
|
Bed size |
12" x 14" |
14" x 16" |
16" x 18" |
18" x 20" |
20" x 22" |
22" x 24" |
24" x 26" |
28" x 30" |
32" x 32" |
34" x 34" |
|
Bed to Ram |
9" |
10" |
11" |
12" |
14" |
16" |
18" |
20" |
22" |
24" |
|
Bed Bore |
4" |
4.1/2" |
5" |
6" |
7" |
8" |
9" |
10" |
11" |
12" |
|
Gear Dia |
18" |
22" |
24" |
26" |
30" |
34" |
38" |
42" |
48" |
54" |
|
Fly Wheel Dia |
21" |
25" |
28" |
32" |
36" |
39" |
42" |
48" |
52" |
58" |
|
Crank Shaft Dia |
3" |
3.1/2" |
4" |
4.3/4" |
5.1/2" |
6.1/2" |
7.1/2" |
8.1/4" |
9" |
10" |
|
Back Shaft Dia |
2.1/4" |
2.1/2" |
2.3/4" |
3.1/8" |
3.1/2" |
4" |
4.3/4" |
5" |
5.1/2" |
6" |
|
Stroke |
2.1/4" |
1.1/2" |
3" |
3.1/2" |
4" |
4.1/2" |
5" |
5.1/2" |
6" |
6.1/2" |
| Hole in Ram for Die Clamping |
1" |
1.1/4" |
1.1/4" |
1.1/2" |
1.3/4" |
2" |
2" |
2.1/4" |
2.1/2" |
2.1/2" |
|
No. of Stokes |
76" |
66" |
58" |
60" |
56" |
53" |
50" |
46" |
40" |
38" |
|
Pully Size |
5" |
6" |
6" |
7" |
7" |
7" |
7" |
7" |
7" |
8" |
|
Total Height |
65" |
72" |
78" |
85" |
91" |
98" |
109" |
117" |
128" |
104" |
|
Motor Required |
1 H.P. |
2 H.P. |
3 H.P. |
5 H.P. |
5 H.P. |
7.1/2 H.P. |
10 H.P. |
15 H.P. |
20 H.P. |
30 H.P. |