Pure molybdenum plate/sheets
Molybdenum sheets from 0.005 inches to 0.150 inches in thickness is classified as molybdenum refractory sheet. It is used for fabrication of sintering boats, high temperature furnace heating elements and heat shields.
Molybdenum plates from 0.187 inches to 3 inches in thickness is classified as molybdenum refractory plate. It is widely used in the construction of furnace tooling and parts and as a feed stock for the fabrication of parts for the electronics and semiconductor industries.
Specification:
Purity:>=99.95%
Density:10.2g/cm3
Thickness :>=0.1mm
Width: 20-600mm
Length: Less than 2000mm
Length: Less than 2000mm
Standard:ASTM,GB3876-83
Surface:Hot rolls, bright, polished
| Molybdenum sheets | ||||||
| Thickness(mm) | tolerances(mm) | width(mm) | tolerances(mm) | length(mm) | tolerances(mm) | flatness(%) |
| 0.1mm | ±0.01 | 600mm | ±1mm | 2000mm | ±5mm | < 2% |
| 0.2mm | ±0.02 | 600mm | ±1mm | 2000mm | ±5mm | < 2% |
| 0.3mm | ±0.02 | 600mm | ±1mm | 2000mm | ±5mm | < 2% |
| 0.4mm | ±0.03 | 600mm | ±1mm | 2000mm | ±5mm | < 2% |
| 0.5mm | ±0.03 | 600mm | ±1mm | 2000mm | ±5mm | < 2% |
| 0.8mm | ±0.05 | 600mm | ±1mm | 2000mm | ±5mm | < 2% |
| 1mm | ±0.06 | 600mm | ±1mm | 2000mm | ±5mm | < 2% |
| 1.5mm | ±0.06 | 600mm | ±1mm | 2000mm | ±5mm | < 2% |
| 2mm | ±0.06 | 600mm | ±1mm | 2000mm | ±5mm | < 2% |
| 3mm | ±0.2 | 500 | ±1mm | 500 | ±2mm | < 2% |
| 4mm | ±0.2 | 500 | ±1mm | 500 | ±2mm | < 2% |
| Our purity guarantee for the moly sheets | |||||
| Fe | Ni | Ca | Mg | Al | Cu |
| 0.001 | 0.0033 | 0.0012 | 0.0022 | 0.00048 | 0.00075 |
| Pb | Bi | Cd | Sb | P | O |
| < 0.0001 | < 0.0001 | < 0.0001 | < 0.0001 | < 0.0001 | 0.033 |
| C | Mo | ||||
| 0.003 | >99.95% | ||||