1. Avoids the damage to the belt through the contact between the bar and surface of belt.
2. The conveyor belt is stressed evenly in the loading area, which will reduce the daily maintenance cost.
3. Effectively eliminate the spillage or scattering of the material caused by unequality of the stress on the belt.
4. The UHMW polyethylene surface has outstanding sliding properties.
5. Arc surface of polyethylene enables the conveyor belt to running smoothly.
6. Ultra elastic rubber absorb the impact in the maximum.
7. Each part of the impact bar is closely jointed by hot vulcanization.
8. "T-track” fastening device has different tightening points along the bar and make the joining strong and reliable, easy to install and remove.
Technical Data:
|
Color of UHMWPE |
Blue/White | |
|
Tensile strength |
(Mpa) |
30 |
|
Elongation at break |
(%) |
300 |
|
Hardness |
(Shore A) |
95-98 |
|
Density |
(g/cm3) |
0. 93-0. 94 |
|
Coefficient of friction |
0. 2 | |
|
Color of rubber |
Black | |
|
Tensile strength |
(Mpa) |
19 |
|
Elongation at break |
(%) |
400 |
Size and Specification:
|
Length |
Width |
Height |
|
1220 |
100 |
50, 75, 100 |
|
1400 | ||
|
1524 | ||
|
1600 | ||
|
1800 |
- Note:
1. Standard accessories including bolt and nylon –inserted hexagon nut are offered.2. Other types can be made according to customers’ demand.