Features
Core to core alignment by PAS technology ( PAS:Profile Alignment System)
Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single X or Y view and X & Y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch TFT color LCD monitor with clear digital image display
USB & VGA interface
Software upgrade via USB interface

Applicable fibers
SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)

Fiber cleaved length
8~16mm(Coating dia.:250μm); 16mm(Coating dia.:250~ 1000μm)

Fiber diameter
Cladding diameter￡o80~150μm; Coating diameter￡o100~ 1000|ìm

Fiber Count
Single

Fiber aligning method
Core or clad aligning

Image processing method
Digital

Actual average splice loss
0.02dB￡¨SM￡?, 0.01dB (MM), 0.04dB (DS), 0.04dB( NZDS)

Splicing time
Typical 9 sec￡?with standard SM fiber

Splicing mode
53(templet), 40(user)

Splice loss estimate
More accurate

Return loss
￡?60dB

Storage of splice result
4000 results￡?20 parameter per result

Fiber display and magnification
300X￡¨X or Y view￡?,150X￡¨X and Y view￡?

Tube heating time
Typical 30 sec

Tube heating mode
9(templet), 24(user)

Tube heatingtemperature
Can be adjusted

Applicable Protection sleeve length
60mm, 40mm and a series of micro sleeves

Tension test
2N

Electrode life
2500

No.of splice/heating with battery
Typical 150 cycles (splice/tube heat) with inner Li-battery

Display screen
5.6 TFT inch color LCD monitor

Image change over
The fiber image is turned upside down

Terminals
USB 1.1 and VGA

Operating condition
0~ 5000m above sea level, 0~ 95%RH and -10??50??, respectively, Max. wind velocity of 15m/s

Power supply
AC 100-240V with AC adapter; inner Li-battery(8000mAH)

Dimensions
150mm(L) x150mm (W) x150mm (H)

Weight
2.7 Kg excluding battery,3.2 Kg including battery