Refuse Handling Vehicles
Refuse Handling Vehicles are a kind of garbage truck (dustcart) widely used in restaurants and kitchens.
Characteristics of Refuse Handling Vehicles:
1. High waste loading volume of 3.1 m3
2. The push shovel is installed in the tank and it is driven by the cylinder. It can glide along the slideway in the tank and push the wastes.
The sliding block is composed of several wedge wear plates. These wedge wear plates are with good wear resistance and low friction coefficient. Resilient sealing ribbon is equipped between the wedge wear plates and pull shovel components. Through adjusting the resilient sealing ribbon, wedge wear plates and the tank can joint closely and so as to pull out all wastes in the tank.
3. The tank’s rear cover is an integral retractable structure and it is opens and closes through the hydraulic cylinder aside the tank.
The gap can be adjusted by the nut on the upper part of the tank. The tank and the rear cover are locked by a retaining mechanism. As a result, the tank is sealed reliably and is also watertight. It can prevent secondary pollution during the transporting of wastes.
4. The lifting and feeding mechanism are affixed on the right-hand side of the garbage truck, so it is easy to feeding wastes. There is also safety equipment equipped to ensure dropping of garbage cans.
Detaching gear is equipped to ensure detaching of garbage cans and feeding device in appropriate time.
5. The hydraulic system adopted multiway valve and the operating board is placed on the plate on the right-hand of the refuse truck.
It is easy to operate and the pipelines are aligned and with a rational distributing.