Descriptions
This fiber optic patch panel is a sliding-out type, size is about 482mm*232mm*45mm.
Typical it is 12,24,36,48,72,144 ports on the panel, we have panels for the most commonly used fiber optic connections like SC, FC, E2000,etc, custom design is also available for more fiber
ports requirement or other types fiber optic connections. For our fiber optic patch panels, we will give fiber tray and fusion protection sleeves and some spare parts for patch panels.
Specifications
Inspection Item Requirement Inspection result
|
Appearance and configuration |
appearance |
shape integnity,no defect,no crack,no impurity,no hole,color uniform,to close and open is easy |
Meet the requirement |
|
Optical fiber storage set |
Residual fiber length no less than
1.6m |
>1.6m | |
|
Residual fiber curvature radius no less than 37.5mm |
>40.5mm | ||
|
Function |
YD/T 925-1997 |
Meet the requirement | |
|
Axis tensile |
Between cable and case > 500N |
Meet the requirement | |
|
Between cable connector and case > 5N |
Meet the requirement | ||
|
Crush |
> 200N |
Meet the requirement | |
|
Torsion |
±90°，3cycles,1min |
Meet the requirement | |
|
High temperature test |
(55±2)℃，2h,after test at room temperature condition for
2h,color uniform,no loss increase |
color uniform,no loss increase | |
|
Low temperature test |
(-25±3)℃，2h,after test at room temperature condition for
2h,color uniform,no loss increase |
color uniform,no loss increase | |
|
Damp Heat Test |
(30±2)℃ （85±3）%，2h,after test at room temperature for
2h,color uniform,no loss increase |
color uniform,no loss increase | |
|
Insulated Resistance |
Insulated resistance≥2
×104M? |
Between two metal sections |
1×106M? |
|
Between metal section and ground |
1×106M? | ||
|
Between two cable |
1×106M? | ||
|
Voltage Resisting
Strength |
DC 15KV holding
1min,No breakage,no electric arc |
Between two metal sections |
No breakage No electric arc |
|
Between metal section and ground |
No breakage No electric arc | ||
|
Between two cable |
No breakage No electric arc | ||