Gigabit Fiber Converter can convert Optical-Electric Ethernet signals between 10/100/1000M UTP interface (TX) and 1000M optical fiber interface (FX). The traditional 10/100/1000M gigabit Ethernet can be extended to the distance of 100km through optical fiber link.

 

Main features

1. Auto negotiation function allows UTP ports to auto select 10/100/1000M and Full Duplex or Half Duplex.

2. UTP port supports MDI / MDI-X auto crossover.

3. Supporting the max 1536 byte Ethernet packet.

4. Supporting flow control

5. Adopting internal power supply

 

Technical Specifications

* Operating standards: IEEE802. 3z/AB 1000Base-T, 1000Base-SX/LX

* MAC address table:4K

* Data Buffer: 256K

* Connector: UTP: RJ-45, 10/100/1000Mbps, Fiber: SC, 1000Mbps

* Cable

UTP: Cat 5e or Cat 6 (the max distance up to 100m)

Fiber (multimode): 50/125, 62. 5/125μm (the max distance up to 550/224m)

Fiber (singlemode): 8. 3/125, 8. 7/125, 9/125μm (the max distance up to 100km)

* Flow control

Full Duplex: IEEE802. 3x flow control

Half Duplex: Back pressure flow control

* Power: A. C. 220V (170-250V), 50Hz; D. C. 5V,2A

* Ambient temperature: 0 ~ +50degree

* Storage temperature: -20 ~ +70degree

* Humidity: 5% ~ 90%

 

Order Information

D1000-GM03: 10/100/1000M Gigabit Ethernet Multimode Converter: Optical wavelength 850nm, optical fiber max distance up to 224m for 62. 5μm, 550m for 50μm

D1000-303S-xx: 10/100/1000M Gigabit Ethernet Singlemode Fiber Converter: Optical wavelength 1310 or

1550nm, optical fiber max distance up to 20, 40, 60, 80 or 100km, xx is the amount of distance.