Product Introduction<<<
Mini-pleated HEPA filter made of ultra-fine glass fiber; with hot melt adhesive separated, plastic glue can be sure that the folds spacing, to ensure the best airflow through to reach a high dust holding capacity, full use of the filter media. Double-side spray mesh grille protect net to protect filter media not damaged, special sealant ensure the tightness of the entire filter. Frame uses hard anodized to increase the degree of corrosion resistance and durability. Each filter has been strictly tested before factory.
Features: High efficiency, low resistance, light weight, thin, easy installation, low running costs.
Application: Electronics, medicine, food, semiconductor manufacturing, Atomic, precision machinery, cosmetics and other places required high clean class.
Material and Operation Conditions
|
Media |
Glass fiber |
|
Sealant |
PU Polyurethane |
|
Frame |
Aluminum/Galvanized steel/Stainless steel |
|
Protect net |
Spray diamond mesh |
|
Separator |
EVA hot melt adhesive |
|
Gasket |
PU Polyurethane, EVA, Neoprene |
|
Filter Efficiency (EN1822) |
H13: 99.97-99.99%@0.3μm H14: 99.995-99.999%@0.3μm |
|
Max. Temperature |
70℃ |
|
Max. Humidity |
80% |
Dimension & Parameters<<<
|
Model |
Size (W×H×D)mm |
Air flow(m3/h) |
Intital Resistance(pa) |
Final Resistance(pa) |
Media area (m2) |
Dust Holding(g) |
Efficiency |
|
AL-H2-001 |
305×305×69 |
260 |
≤200 |
400-600 |
2.5 |
150 |
H13-H14 |
|
AL-H2-002 |
484×484×69 |
700 |
≤200 |
400-600 |
6.6 |
400 |
H13-H14 |
|
AL-H2-003 |
610×610×69 |
1000 |
≤200 |
400-600 |
10.7 |
650 |
H13-H14 |
|
AL-H2-004 |
610×915×69 |
1600 |
≤200 |
400-600 |
16.0 |
950 |
H13-H14 |
|
AL-H2-005 |
1220×610×69 |
2100 |
≤200 |
400-600 |
21.3 |
1000 |
H13-H14 |
|
AL-H2-006 |
484×484×96 |
1000 |
≤200 |
400-600 |
10.2 |
620 |
H13-H14 |
|
AL-H2-007 |
610×610×96 |
1500 |
≤200 |
400-600 |
16.2 |
980 |
H13-H14 |
|
AL-H2-008 |
1220×610×96 |
3100 |
≤200 |
400-600 |
31.9 |
1920 |
H13-H14 |
Customized design is welcome.