Product Main

Specifications

The reinforced wood-plastic formwork features as follows:
1. About 80-100 recycles of use;
2. High cost-performance ratio, the cost of manufacturing the formwork is 20%-30% of that of steel and bamboo formwork;
3.  Can be 100% recycled.
4.  Stock size:1000mmx2000mm
              1220mmx2440mm
5.  Best impermeability, no delamination, and use on both sides
6.  Excellent mechanical property, with bending wet strength more than 35mpa, and elastic modulus more than 4200mpa.
7.  Smooth surface and good effect of demolding.
8.  Addition of abrasion resistant materials on surface to increase the abrasion resistance.
9.  Dark color to absorb ultraviolet ray, and retard ageing of plastics.
10. Thermal insulation with good temperature retention.
Precautions for processing the reinforced plastic formwork.
1.  The alloy saw blade shall be used for cutting(diameter: 10-12 inch,teeth:100-120).
2.  In case of connection with timber, the guiding hole with electric drill is necessary.
3.  In case of welding, water the surface of the forwork to avoid burning the surface by the large welding slag.
4.  Storing and stacking: after each construction, they must be stacked regularly on the flat ground for the nest use.