HOMAC400: for a new bathroom in a loft conversion or extension. Takes waste from a bath, shower cubicle, toilet and wash basin
HOMAC400, the top of the range product enabling the addition of a complete bathroom - WC, shower installation, bidet and washbasin - has also been re-cased with sound reduction, and an integrated carbon filter.
A powerful motor enables HOMAC400 to pump the waste and water from a complete bathroom up to 5m vertically, 100m horizontally or a lesser combination of both.
Add a complete bathroom in a basement conversion or loft extension or anywhere conventional large bore pipework is impractical.
|
Motor |
induction motor (no carbon brushes or gears to wear out). Tested over 30,000 cycles. |
|
Watts (Consumption) |
400w |
|
Electrical Supply |
220-240V 50Hz |
|
Flow rate at max head l/min |
40 |
|
Horizontal Discharge |
100 metres |
|
Vertical Discharge |
5 metres |
|
Gravity fall on horizontal installations |
1:100 |
|
Discharge Pipe Diameter |
22mm |
|
Materials |
Polypropylene, C.R.P., stainless steel, Neoprene |
|
Type of WC Pan (not included) |
Short spigot 100mm HO outlet (BS EN 33/37) |
|
Motor RPM |
2800 RPM |
|
Normal Running Time WC |
10–20 secs approx or as required, to discharge bath, shower etc |
|
Dimensions (vertical height is measured from floor level) |
512W x 305 O/H x 200D (requires 210mm behind spigot) |
|
Technote |
Designed to fit BS EN 33/37 WC pans. As close coupled cistern dimensions vary, it may be necessary, with certain designs, to utilise a spacer between cistern and wall |