Ball Mill is a key machine for further breakage after raw materials have been crushed. It is widely used in the field of cement, silicate products, new building materials, refractory materials, fertilizer, ferrous metal and non-ferrous metal beneficiation, glass and ceramics,milling various ores and other abrasive materials with dry type or wet type.
Structure Features
The Ball Mill consists charging part, discharging part, rotary part, transmission part (velocity decreasing machine, small conveying gear, motor, electric control) and so on. The quill shaft is made of casting steel and the inner liner palate is replaceable. The big rotary gear is processed by cast roll tooth. There is wear- resistant liner palates welded on the inner wall of the drum so that it has good wear proof ability. The Ball Mill operates stably and reliably.
It can be divided into dry Ball Mill and wet Ball Mill with lattice according to the materials and discharging way.
Technical Parameter
|
Specification (mm) |
Drum Rotary Speed (r/min) |
Ball Loading (t) |
Charging Granularity mm |
Discharging Granularity mm |
Output t/h |
Motor Power kw |
Weight t |
|
900×1800 |
38 |
1.5 |
≤ 20 |
0.075-0.89 |
0.65-2 |
18.5 |
3.6 |
|
900×2400 |
38 |
2.7 |
≤ 20 |
0.075-0.89 |
1.1-3.5 |
18.5 |
4.1 |
|
900×3500 |
38 |
2.7 |
≤ 20 |
0.075-0.89 |
1.1-3.5 |
22 |
4.6 |
|
1200×2400 |
32 |
4.8 |
≤ 25 |
0.075-0.6 |
1.5-5.8 |
45 |
12.5 |
|
1200×4500 |
32 |
6 |
≤ 25 |
0.074-0.4 |
1.6-6 |
55 |
12.8 |
|
1500×3500 |
32 |
7 |
≤ 25 |
0.074-0.4 |
1.6-5.8 |
75 |
13.8 |
|
1500×3500 |
32 |
7 |
≤ 25 |
0.074-0.4 |
1.6-5.8 |
75 |
13.8 |
|
1500×5700 |
27 |
15 |
≤ 25 |
0.074-0.4 |
3.5-6 |
90 |
24.7 |
|
1830×3600 |
24 |
11 |
≤ 25 |
0.074-0.4 |
4-10 |
155 |
28 |
|
1830×6400 |
24 |
23 |
≤ 25 |
0.074-0.4 |
6.5 |
210 |
36 |
|
1830×7000 |
24 |
25 |
≤ 25 |
0.074-0.4 |
7.5 |
245 |
38 |