1. Main usage: The machine is mainly use for copper line continuously drawing, anneal and pre-heat process, it also can be used for drawing aluminum line with similar diameter. 

2. Applying scope: Maximum line in diameter φ1.2mm (soft copper line)

 

2.Product working environment and condition

 

1. Working environment

Height above sea level less than 1000m.

Environment temperature －10℃－40℃

Comparative environment temperature less than 85% (25℃）

 

2. Working condition:

 (1) Working voltage: 380V  50Hz

 (2) Maximum gas consumption:  0.3 cubic meter/minute

 

3  Main technique parameter:

1. Line in diameter: φ0.6mm-φ1.6mm

2. Line out diameter: φ0.2mm-φ0.6mm

3. Maximum anneal speed: 1200m/min

4. Anneal wheel diameter: φ200mm

5. Anneal type: DC three step anneal

6. Max. dies number: 14 (Customer self provided)

7.  Dies outer diameter: ф25mm ×thickness8mm or 12mm

8.  Mechanism  surface reduce rate:

From No.1 to No.13              15%

                                          No.14                            8%

9. Drive motor: 18.5KW-4P  AC motor and 18.5KW transducer

10. Reeling motor: 5.5KW-4P   AC motor and 5.5KW transducer

11. Max. anneal current: 600A