1                    Product main usage and applying scope:

1. Main usage: The machine is mainly use for copper line continuously drawing, anneal and pre-heat process, it also can be used for drawing aluminum line with similar diameter. 

2. Applying scope: Maximum line in diameter φ1.2mm (soft copper line).

2                    Product working environment and condition

1. Working environment

Height above sea level less than 1000m.

Environment temperature －10℃－40℃

Comparative environment temperature less than 85% (25℃）

    2. Working condition:

 (1) Working voltage: 380V  50Hz

 (2) Maximum gas consumption:  0.3 cubic meter/minute

3                    Main technique parameter:

1. Line in diameter: φ0.6mm-φ1.38mm

2. Line out diameter: φ0.10mm-φ0.32mm

3. Maximum anneal speed: 1800m/min

4. Anneal wheel diameter: φ160mm

5. Anneal type: DC three step anneal

6. Max. dies number: 22 (Customer self provided)

   Min. dies number: 12 (Customer self provided)

7.  Dies outer diameter: ф25mm ×thickness8mm or 12mm

8.      Mechanism  surface reduce rate:

From No.1 to No.21:             15%

                                          No.22                            8%

9. Drive motor: 15HP-4P  AC motor and 15HP transducer

10. Reeling motor: 5HP-4P   AC motor and 5HP transducer

11. Max. anneal current: 250A

12. Max. anneal voltage: DC50V

13.   Cooling water tank capacity: 225L

14.  Consumption amount of compressed air: 225L

15.  Pressure of the compressed air: 0.4 Mpa

16.   Steam consumption (taking care by customer): 2kg/h

17.   Steam pressure:  0.2-0.3Mpa

18.   Machine dimension(mm): 2100L×1600W×1700H

19.   Machine total weight (kg): 3000