This machine adopts the technology of PLC programming, variable frequency speed regulating. It integrates the functions of embossing, punching, automatic paper tube changing and automatic sealing in one machine. It can greatly increase the production efficiency and guarantee good quality of frapping roll with the non-stop continuous work of auto-paper core changing. The automatic sealing can reduce wastage, and convenient for slitting. The adopting of spiral blade in punching, make the machine can operate with low noise, and clear slitting with slight pull, moreover, the length and weight is adjustable according to the requirement.
|
TYPE |
1092 |
1575 |
1760 |
2500 |
2800 |
||
|
Raw Paper Roll Width |
1350mm |
1750mm |
2000mm |
2400mm |
2700mm |
||
|
Raw Paper Roll Outside Dia. |
1100mm(Other Size to be Specified, the Max.Outer Dia.Of Raw Paper is 2500mm) |
||||||
|
Core Inside Dia Of Raw Paper |
3''(76.2mm)(Other Size to be Specified) |
||||||
|
Parameter Set-up |
On the operating panel (touched screen operating panel need to be ordered) |
||||||
|
Programming Controller |
PLC |
||||||
|
Braking |
Electronically and Air Pressure Control |
||||||
|
*Embossing |
Single Embossing, Double Embossing, Steel to Steel Embossing, Pneumatic Embossing (To be Ordered) |
||||||
|
*Bottom Embossing Roller |
Felted Roller, Paper Woolen Roller, Rubber Roller (To be Ordered) |
||||||
|
Machine Speed |
0-200M/min |
||||||
|
Max Speed |
180M/min |
||||||
|
Finished Product Size |
90-135mm(Other Size to be Specified) |
||||||
|
Finished Product Dia Control |
Electronically |
||||||
|
Sheets Of Finished Product Control |
Increase gradually tills to reach the setting sheets. |
||||||
|
Perforating Size |
108mm±2mm(Other Size to be Specified) |
||||||
|
Perforating Anvil |
4pcs |
||||||
|
Perforating Size |
(With 4 Pieces of Blade, the Node Distance is: 90mm-140mm)(With 2 Pieces of Blade, the Node Distance is: 200mm-350mm(To be ordered)(With 1 Pieces of Blade. The Node Distance is: 200mm-500mm) |
||||||
|
Core outside DIA of finished product |
25-50mm |
||||||
|
Mechanical driving |
Sleepless Gearbox. The machine conveys without belt, which can guarantee the accuracy of each sheet size and the total length of finish products. |
||||||
|
Pneumatic system |
3 HP Air Compressor, which the Min.pressure is 5kg/cm2pa (Supplied by User) |
||||||
|
Control voltage |
Stable Voltage DC24V |
||||||
|
Main transmission power |
Variable Frequency Speed Regulating |
||||||
|
Paper unwind stand |
1-3 Stands (The Qty.of raw paper rolls to be specified)(To be Ordered) |
||||||
|
*Weds edge control |
Controlled by PLC, Tracked with Sensor (To be Ordered) |
||||||
|
Packing measure |
It will be different According to the different type of machine and different configure. |
||||||
|
*Edge-embossing |
Special Pneumatic Embossing Device (To be Ordered) |
||||||
|
*Gluing |
Gluing on Convexity (To be Ordered) |
||||||
|
*Decorative gluing system |
Subject to the embossing pattern (to be ordered) |
||||||