Application of Jaw Crusher: Zoneding Jaw Crusher series can meet most crushing requirements in primary and secondary crushing, and the largest compression resistance of the material is 320MPa. This series are widely used in stone mining, metallurgical, construction, smelting, hydraulic and chemical industries, etc. Working principle of Jaw Crusher: The motor transmits power through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate increases when moving jaw moves. So the moving jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet. Characteristics of Jaw Crusher: -High crushing ratio -Even product granularity -Simple structure -Wide ranges of choices -Reliable working condition -Convenient maintenance Models: PE-150 PE-250 PE-400 PE-500 PE-600 PE-750 PE-900 PE-1000 PE-1200 PEX-150 PEX-250