1. Wafer Diameter: (125 x 125)+/-0,4mm

2. Dimensions Tolerance: +/-0,4mm

3. Thickness of wafer, measured in the center of wafer: 190+/- 10μm, ≥185 μm

4. TTV: not more than 25 μm

5. Saw mark: ≤15 μm, invisible by eyes

6. Camber: ≤30 μm

7. Arc width departure(Big and small angle): ≤2mm in 45°

8. Surface Quality: No crack, no obvious saw mark, without obvious tactility, no pit, no V type gap, no hole, no glue left, surface cleaned, no abnormal spot, no stain.

9. Notch: not allowed

10. Tiny luminance Edge: Width ≤1/3 of wafer thickness; Length≤1/2 of wafer dimension

11. Edge defect: Edge defect width ≤0.2mm; extension less than 0.5mm; with total quantity ≤2, distance≥30mm