Heat-treatment glass can improve its mechanical strength without increasing the weigh and thickness of itself. Featured resistance to wind, impact and thermal stress, it is divided into tempered glass and semi-tempered glass.

Tempered glass: is made by the methods of heating glass to softening point in horizontal toughened safety machine and quick cooling with cool wind .After tempering it forms tensile stress inside thus greatly enhance its bending and compact strength 4 times higher than that of common glass. When broken, it is only split into small pellets without sharp edge. It is an ideal safe glass.

Semi-tempered glass)strengthened glass) it is processing is the same as tempered glass except for its stress resistance. It is surface quality is better than tempered glass.

Toughened homogeneous stove YZ2560 is a kind of affiliated equipment for tempered glass. After finished tempering, it carries out homogenization inside the stove and makes its inner stress even to reduce splash and improve quality.

FEATURES:

1 Fine safety (tempered glass)

2 High strength, tempered glass is four  times as high as common glass and strengthened glass is twice as high as common glass.

3 Thermal stress and wind resistance.

4 Bending and shock resistance.

Application:

1 Architectural safely glass(tempered glass)

2 indoors and outdoors decoration

3 glass partitions and elevator partitions(tempered glass)

4 glass furniture, shelf $ stand, counter and phone kiosk

5 glass curtain walls and windows of building.

Specification:

Horizontal temper: Max size 2440X5000mm

Min size:200X350mm

Thickness:4-19mm

Bending temper:

Max size: 2440X5000mm Min size : 500X500mm

Min radius: 5-6mm 1500mm

8-12mm  1800mm

15-19mm 2000mm

Thickness:5-19mm

Toughened homogeneous stove: Max size : 6000X2500mm

Thickness:3-19mm

 

Notice: 1 there sometime appears slight light-lopsided phenomenon viewed at a certain angle .this is the characteristic of heat-treatment glass.

2 before heat treatment, all glass must be cut into the size you  need and drilling holes and edging.

Standard: GB/T9963-1988 tempered glass

GB17841-1999 curtain wall tempered glass and semi-tempered glass.