1. Pour warm water into the basin(water temperature is bout 38℃～45℃), the water level reach certain height(but must higher than foot level)

2. Put a little salt into the water(the salt makes ion works better)

3. Keep the adapter connected with the basin power supply plug.

4. Keep wrist belt plug connected with the hole in the basin.

5. Keep ion cleanse array connected with the hole in the basin

2. Starting use.

1. Put on the wrist belt (keep the belt touch the skin)

2. Put the ion cleanse array into the water(the ion cleanse face is above)

3. Put the feet into the basin

4. Starting the ion detox machine. When using this machine, please relax youself natural, close your eyes sleeping or reading both available.

3. How to operate the control board

There are 5 buttons in the control board: （SELECT）,（UP）,（DOWN）,（START/STOP）,（ON/OFF）

4. Attention

1,Please check if all the plug is right when pressing the ON/OFF button,but the light is not open.

2,When pressing START/STOP button, but the machine shows does not work, please check the adapter and power supply. If the shows light is open, but （Work electricity）does not show number, Please check the wrist belt if it connected with body skin.

3,when the salt dosage is too big (the electricity show exceeding 4.50A), the machine will alert; when exceed 5A, the machine will stop work to self protect, the work pressure will show OFF, by then please add certain water or restart to pour water .