outdoor wall lights (Au5471-1) technical specifications
outdoor wall lights (Au5471-1) is made of 6 parts.
THE CROWN in casting aluminum fixed to the dome.
THE DOMEis made of embossed aluminum sheet, assembly is held to the CDG steelreflector by means of 1 stainless steel mounting. Once the dome isremoved, the control gears are easily attained.
THE FRAMEof the luminaire is made up of 3 parts, a ring of crown in castaluminum supported by 4 ribs in cast aluminum fixed to the base flange.Mounting for Φ26 held with 2 stainless steel screws.
THE OPTICAL BLOCK is make up of 3 parts sealed together so as to obtain a high degree of protection,
A control gear on the CDG steel sheet, once remove the dome and the top crown, the control gears are easily attained.
The diffuser in frost methacrylate.
Areflector made from embossed CDG steel sheet and a pure aluminumreflector, stamped out in one piece and anodized which is fixed on theCDG steel sheet, the control gear is placed around the reflector.
THE BASE FLANGE in cast aluminum, top mounting for Φ26mm.
THE MOUNTING BRACKET in cast aluminum, style on request.
Painted by polyster powder coating, color on request.
Protection degree: optical block IP65.
Shock energy: 2 joules(methacrylate diffuser)
CLASS I
CLASS II on request
Socket: E27/E40
Lamps: H.P.S. 250W MAXI
Packing size(cm): 53*53*86
Mounting height(m): 3~6
outdoor wall lights (Au5471-1) is made of 6 parts.
THE CROWN in casting aluminum fixed to the dome.
THE DOMEis made of embossed aluminum sheet, assembly is held to the CDG steelreflector by means of 1 stainless steel mounting. Once the dome isremoved, the control gears are easily attained.
THE FRAMEof the luminaire is made up of 3 parts, a ring of crown in castaluminum supported by 4 ribs in cast aluminum fixed to the base flange.Mounting for Φ26 held with 2 stainless steel screws.
THE OPTICAL BLOCK is make up of 3 parts sealed together so as to obtain a high degree of protection,
A control gear on the CDG steel sheet, once remove the dome and the top crown, the control gears are easily attained.
The diffuser in frost methacrylate.
Areflector made from embossed CDG steel sheet and a pure aluminumreflector, stamped out in one piece and anodized which is fixed on theCDG steel sheet, the control gear is placed around the reflector.
THE BASE FLANGE in cast aluminum, top mounting for Φ26mm.
THE MOUNTING BRACKET in cast aluminum, style on request.
Painted by polyster powder coating, color on request.
Protection degree: optical block IP65.
Shock energy: 2 joules(methacrylate diffuser)
CLASS I
CLASS II on request
Socket: E27/E40
Lamps: H.P.S. 250W MAXI
Packing size(cm): 53*53*86
Mounting height(m): 3~6