Machine description:

This machine can be used to produce 2 different profiles of corrugated steel sheets, e.g. 2 wall& roof sheets, or 1 wall& roof sheet and 1 floor decking sheet. This machine mainly consists of 1 uncoiler and its base, 2 coil sheet guiding& adjusting devices, 2 roll forming systems, 1 hydraulic cutting system, 1 PLC controller, 1 hydraulic station and 2 run out tables.

Option: hydraulic uncoiler, safety shield

 

Working flow:

coil load—uncoiling—sheet guiding& adjustment —roll forming—post-cutting—run out table

Technical parameter:

Material spec: steel coil with yield stress of MPa 235 (33KSI)

Material thickness: 0.3-0.8mm&0.3-0.8     0.3-0.8&0.8-1.2mm (wall sheet& floor decking)

Forming speed: 18-22m/min

Main motor power: 5.5kw

Hydraulic power: 2.2kw

Passive uncoiler: max capacity 5000kgs

Roller stands: about 20 groups

Roller material: high grade No. 45 steel coated with hard chrome, hardness: HRC58-62

Cutting blade material: Cr12MoV (ASTM D2) mould steel with heat treatment

Controlling system: PLC

Main machine dimension: about 11000*1500*1500mm

Machine weight: about 13000kgs

Voltage: 380V, 3 Phases, 60Hz or according to customer’s requirement