1.Product description: the system consists of 6 sets of equipment of lengthened automatic stripe cutting machine, ZQP36 automatic blank cutting machine, GD automatic transition machine, MPJ automatic, FPJ blank separating machine and automatic turning vehicle of drying car. 

2.Technical Parameters:

Automatic Stripe Cutting and Blank Cutting System

Installed capacity	length of maximum blank cutting mud	Production capacity	Maximum pressure of hydraulic system	gas source pressure	maximum pushing times	Nature of the mud	outline dimension(mm)
2.2kw+ (Unified equipment of motor in hydraulic station, 15kw in total)	2000mm	25000 pieces/hr (standard)	10Mpa	0.6MP	≤14times/min	Semi-hard plastic, hard plastic	3646x1455x1415 (Blank ) 3264x995x755 (Stripe cutting machine)

Grouping Machine Waiting for Transition

Installed capacity	Length of maximum blank cutting mud	Production capacity	system	Maximum pushing times		outline dimension(mm)
2.2KW+ (unified equipment of motor in hydraulic  station,15kw in total	1980mm	25000pieces/hr	3Mpa	≤4times/min		4400x1640x1599

Automatic Separating Machine

maximum blank separating pieces	Maximum blank separating times	max pressure of pushing gas source	outline dimension(mm)
36 pieces(standard)	4 times/min	0.6Mpa	3500x1000x690

Automatic Setting Machine

Installed capacity	Production capacity	Maximum oil pressure required by ascending and descending	maximun pressure of folder blank gas source	outline dimension(mm)
3kw+(unified equipment of motor in hydraulic station,15kw in total)	≤120vehicles/hr	10Mpa	0.6Mpa	4750x4000x2926+900

Automatic Turning Vehicle of Drying Car

installed capacity	Production capacity	Maximum turning times	The maximum oil voltage required by turning	outline dimension(mm)
Unified equipment of motor in hydraulic station, 15kw in total	≤120 vehicles/hr	4 timese/min	6Mpa	5689x1275x508

3.Advantages: a, high yield; the maximum f the system exceeds 20,000 standard s / hour, while the maximum yield of domestic similar products is below 15,000 standard pieces / hour; b, and small mud; the system takes the approach of soft start and soft stop with electrode, thus having low impact on mud and accurate positioning. The domestic similar products mostly adopt baffle positioning methods, which have strong impact on mud, thus the front mud is severely distorted because of impact; c, transition is added to avoid shutdown when the mud is too quick;  d, is taken to avoid drooping blank and damage of plate to the surface of blank; e, by turning of drying car not only saves time but also adds stability during the operation of setting machines; f, energy- saving, small power, steady work; the automatic setting hydraulic system adopts the operating mode of energy storage container and single drive to avoid frequent start of motor.