Technical Parameters of the insulating glass machine

        Input voltage                                     380v 50Hz (can be customized)

        Total Power                        13kw

        Max glass size                     1600mm*2200mm

        Board closing way                  automatic in plate

        Operation direction                from right(can be customized)

        Cleaning speed                     5.6m/min

        Max operation speed                25m/min

        Single glass thickness             3-10mm

        Max insulating glass thickness     55mm

        Output per 8-hour                  300-500 picies

        Air pressure                       0.8MPa   60L/min

        Water supply                       tap water

        Dimension                          13000mm*2250mm*2600mm

        Total Weight                       3500Kgs

Machine introduction of the insulating glass machine

1、LBP1600 vertical insulating glass production flat press line is a perfect equipment to produce slot-alu insulating glass, made up of loading conveyor, washing and drying machine, inspection conveyor, aluminium frame locating machine, automatic flat press machine, output conveyor.

2、The washing machine adopts stainless steel integral housing structure, made up of washing box, brushing machine, air-dry machine, connecting water box and strong power blower. There are double pairs of soft hair brushes, washing glasses gradually, it can also wash low-e glass. The stainless steel water box is separated into two independent boxes, both equipped water-feeding pump to feed water for cleaning and brushing. This reasonable design can play the function of water saving and clear clean well. The blower adopts loop path, energy saving and striking washing and drying effect, low noise.

3、Flat press machine adopts close board in plates, back plate has air float equipment, and front plate has vacsorb system. It has following features: stable operation, good stitching effect, high speed. Customers who use import PLC can set different stop time, pressing time and pressure based on differences glass, aluminium and butyl. It can realize perfect union of speed and high-quality pressing effect. Its unique retainer system can press glasses front and back glasses on the same level, protecting conveyance wheels from glass wearing , avoiding dislocation of finished insulating glasses and glasses breakage because of wear of wheels.

4、 The whole line is controlled by import PLC and transducer, operated and shown by human-computer interface. Its operating condition can be reflected conveniently and directly. It can control the transducer's speed and equipment operating condition on basis of glasses location which is detected by detector switch.