How to use this neck massager:

STEP 1: PUT ON NECK TRACTION FIXER

Place the NECK TRACTION FIXER comfortably around neck (INFLATOR should be on your left-hand side). Switch off INFLATOR, make sure BALL 1 & BALL 2 are in the grooves, fasten the NYLON STRAPS.

 

STEP 2: INFLATION

Inflate Neck Traction Fixer with inflator slowly, and at the moment three chambers are inflated evenly. Push Ball No.2 to the tube (around 1 cm above the groove) when the first chamber touches your mandible to make sure the channel leading to Chamber 1 is blocked,  therefore no exceeded pressure would be exerted to mandible.

 

STEPP3: INFLATION

Continue inflating Chamber No.2 and No.3 until the user feels comfortable with the traction.

 

STEP 4: INFLATOR PROTECTION

After sufficient inflation, the user should push BALL NO.1 to the tube (around 1 centimeter above the groove), so as to protect the inflator.

 

STEP 5: ONE-SIDE TRACTION

Left and right sides of Chamber No.2 and No.3 are connected with nylon straps. If the patient only experience neck pain on the left side, he can simply separate the right connection of Chamber No.2 and No.3 with the nylon strap, and put the right side of Chamber No.3 to the back of shoulder. In this way, the left-side of neck is stretched, meanwhile the left-side of neck won’t feel any pressure. For right-side pain in the neck, vice versa.

 

STEP 6. DEFLATION

push BALL NO.1 back to its groove, switch on the pump slowly to let the neck traction fixer deflate slowly. Note: neck is already stretched for a long time and fast deflation might injure the neck.

 

STEP 7: TAKE OFF 

Users can take off neck traction when feel no traction any more. And then, push Ball No.2 back to its groove and continue releasing the air inside.  (Note: a little amount of air should be left in the three chambers so as to prolong its using life)