NO.	Discription	Parameter
1	X,Y,Z Working Area	1240x24600x200mm Options:1500X3000X200
2	Table Size	1320×3040mm
3	X,Y,Z Traveling Positioning Accuracy	±0.04/300mm
4	X,Y,Z Repositioning Positioning Accuracy	±0.05mm
5	Table Surface	Vacuum System(Option:T-slot and Vacuum Table)
6	Frame	Welded Steel
7	X, Y Structure	Rack and PInion Drive,Hiwin Rail Linear Bearings
8	Z Structure	Ball Screw, Hiwin Rail Linear Bearings
9	Max. power Consumption(Without spindle)	5.0Kw
10	Max. Rapid Travel Rate	32000mm /min
11	Max.Working Speed	20000mm /min
12	Spindle Power Motor	8.0Kw HSD Air cooling Spindle (Options:3.8kw HSD Air cooling Spindle)
13	Spindle Speed	6000-18000RPM
14	Drive Motors	Servo Motors and Drivers
15	Working Voltage	AC380V/50/60Hz,3PH
16	Command Language	G Code
17	Operating System	Syntec System
18	Interface	USB
19	Flash Memory	128M (U Disk)
20	Collet	ER25
21	X,Y Resolution	<0.01mm
22	Software Compatability	Type3 software,Alpha CAM
1	X,Y,Z Working Area	600x900x120mm
2	Table Size	1560X1050mm
3	X,Y,Z Traveling Positioning Accuracy	±0.03/300mm
4	X,Y,Z repositioning Positioning Accuracy	±0.02mm
5	Table Surface	T-slot Extrusions
6	Frame	Welding steed
7	X, Z Structure	Ball Screw
8	Y Structure	Hiwin Rail Linear Bearings and Ball Screw
9	Max. power Consumption	0.8Kw
10	Max.Rapid Travel Rate	8000 mm /min
11	Max.Working Speed	6000mm /min
12	Spindle Power Motor	1.5Kw self cooling spindle
13	Spindle Speed	0-24000RPM
14	Drive Motors	Stepper system