Photoelectric Sensor
Slot sensor (SLO30VB/SLO30VB6/SLO30UB)
Main Features:
An easy-to-use self-contained opposed-mode sensor pair in a rugged U-shaped housing
Easy and economical to mount
Molded-in beam guides simplify mounting and beam placement
30 mm slot width for a wide variety of sensing applications
Applications include hole detection, gear tooth detection, edge guiding and counting of opaque materials
10 to 30V dc operation
Bipolar PNP/NPN outputs
Choose 1 millisecond or 300 microsecond response
2 mm effective beam
Dark or light operate
Choose integral, unterminated cable or QD models
Technical Parameters:
| ||
|
Slot Opening |
30 mm (1.2") wide x 45 mm (1.8") deep overall; beam set in 10 mm (0.4") from outer edge | |
|
Supply Voltage
and Current |
10 ~ 30V DC, 30mA | |
|
Supply Protection Circuitry |
Protected against reverse polarity and transient voltages | |
|
Output Configuration |
Bipolar: NPN (current sinking) and PNP (current sourcing) | |
|
Output Rating |
150mA, each output | |
|
Output Protection Circuitry |
Protected against false pulse on power-up and short-circuit of outputs | |
|
Output Response Time |
≤300μs | |
|
Repeatability |
≤75μs | |
|
Adjustments |
None | |
|
Indicators |
Green: Power ON/OFF indicator Yellow: Signal Condition indicator | |
|
Construction |
Housing: ABS/polycarbonate
Lenses: Acrylic | |
|
Environmental Rating |
IP67, NEMA 6 | |
|
Connections |
2 m (6.5') or 9 m (30') 5-conductor PVC-jacketed attached cable | |
|
Operating Conditions |
Operating Temperature: -40° to +70°C (-40° to +158°F) Maximum relative humidity: 90% @ 50°C (non-condensing) | |