Description:
The Digital satellite finder SF6000 is a professional, quality made instrument for setting and aligning a satellite dish to any satellite. According to parameters of the satellite, you can set and align a satellite dish very accurately, quickly and conveniently.
Product Features:
1. Smallest and lightest satellite finder which has the colorized LCD.
2. Show the TV directly by colorized LCD.
3. Graphic user interface, Designed to be very easy to use.
4.With Fast and easy menu structures. It can calculate Azimuth, Elevation and Polarization automatically according to local longitude and latitude and show these details on the colour LCD display.
5. It can communicate with your PC through the serial port and you can update new satellite parameters conveniently.
6. With A Large memory capacity you can pre-store 80 satellite’s parameters and 40 measurement records.
7. With the high quality LCD screen you can watch the TV channel from the satellite you are testing. This is giving the ultimate verification that the satellite you are looking at is the correct one.
8. Total software upgrade. Software stored in Flash memory for later upgrade.
9. Pre-programmed with most regionally used satellites.
10. Signal strength and Bit Error Rate (Picture Quality) displayed simultaneously.
11. Up to 80 satellites may be programmed.
12. Bar-graph for Signal Strength.
13. Bar-graph for BER (Picture Quality).
14. Satellite settings store in non-volatile EPROM.
15. Short circuit proof on LNB output.
16. Internal battery powers the LNB.
17. Works with all stander, universal, linear (DVB) and circular (DSS) polarity LNBs.
18. Set satellite's related parameter which includes LNB frequency and working voltage (mode of polarization), satellite downstream frequency, symbol ate, 22K situation etc.
19. AZ, EL, and PO self-calculated for providing initial dish set-ups.
20. Align dish without IR/D, TV and power.
21. In alignment process, once a satellite is found by setting related parameter, we can adjust the dish's orientation and pitching angle according to inside audible tone.
22. Measure RF signal level, bit error rate, carrier-to-noise rate and current.
23. Provides special software that can be used to check local position. AZ, EL, and PO for almost all big cities around the world in alignment process of a certain satellite.
24. Plans can be downloaded from a certain website by RS232 port.
Specification:
Frequency range: 950MHz~2150MHz
Input dynamic range: -65dBm~-25dBm
RF input connector: F type
Input resistance: 75 Ohms
22KHz Signal: 22KHz+2KHz
Items of measurement: QPSK signal level, Bit error rate, carrier rate
Storage: 80 value of measurement, 80 configuration data
Mode of satellite finding: sound and LCD volume LNB
powersupply: Horizontal polarization+18V,<400mA Vertical polarization+13V, <400mA
Total power: 8W
Working time: 3~4hours
Connector: Rs232
Working temperature: 0~400C
Storage temperature: -20~700C
Package includes:
1x Common power supply adapter or Cigarette lighter adapter
1x RF input connector GMHF-L3/8-JK
1x Instrument bag
1x Operator's manual
1x CD-ROM
1x Data cable
The Digital satellite finder SF6000 is a professional, quality made instrument for setting and aligning a satellite dish to any satellite. According to parameters of the satellite, you can set and align a satellite dish very accurately, quickly and conveniently.
Product Features:
1. Smallest and lightest satellite finder which has the colorized LCD.
2. Show the TV directly by colorized LCD.
3. Graphic user interface, Designed to be very easy to use.
4.With Fast and easy menu structures. It can calculate Azimuth, Elevation and Polarization automatically according to local longitude and latitude and show these details on the colour LCD display.
5. It can communicate with your PC through the serial port and you can update new satellite parameters conveniently.
6. With A Large memory capacity you can pre-store 80 satellite’s parameters and 40 measurement records.
7. With the high quality LCD screen you can watch the TV channel from the satellite you are testing. This is giving the ultimate verification that the satellite you are looking at is the correct one.
8. Total software upgrade. Software stored in Flash memory for later upgrade.
9. Pre-programmed with most regionally used satellites.
10. Signal strength and Bit Error Rate (Picture Quality) displayed simultaneously.
11. Up to 80 satellites may be programmed.
12. Bar-graph for Signal Strength.
13. Bar-graph for BER (Picture Quality).
14. Satellite settings store in non-volatile EPROM.
15. Short circuit proof on LNB output.
16. Internal battery powers the LNB.
17. Works with all stander, universal, linear (DVB) and circular (DSS) polarity LNBs.
18. Set satellite's related parameter which includes LNB frequency and working voltage (mode of polarization), satellite downstream frequency, symbol ate, 22K situation etc.
19. AZ, EL, and PO self-calculated for providing initial dish set-ups.
20. Align dish without IR/D, TV and power.
21. In alignment process, once a satellite is found by setting related parameter, we can adjust the dish's orientation and pitching angle according to inside audible tone.
22. Measure RF signal level, bit error rate, carrier-to-noise rate and current.
23. Provides special software that can be used to check local position. AZ, EL, and PO for almost all big cities around the world in alignment process of a certain satellite.
24. Plans can be downloaded from a certain website by RS232 port.
Specification:
Frequency range: 950MHz~2150MHz
Input dynamic range: -65dBm~-25dBm
RF input connector: F type
Input resistance: 75 Ohms
22KHz Signal: 22KHz+2KHz
Items of measurement: QPSK signal level, Bit error rate, carrier rate
Storage: 80 value of measurement, 80 configuration data
Mode of satellite finding: sound and LCD volume LNB
powersupply: Horizontal polarization+18V,<400mA Vertical polarization+13V, <400mA
Total power: 8W
Working time: 3~4hours
Connector: Rs232
Working temperature: 0~400C
Storage temperature: -20~700C
Package includes:
1x Common power supply adapter or Cigarette lighter adapter
1x RF input connector GMHF-L3/8-JK
1x Instrument bag
1x Operator's manual
1x CD-ROM
1x Data cable