I Overview
GPS58R GPRS device with smart design, but powerful as well as stability in function.
It combined with GPRS/GSM technology of the function of location, listen in, urgent alarm and monitoring. In advantage of easy install, convenient in operation, good and powerful function; it applies to private cars, government vehicles and renting vehicles, motorcycles.
II Features
＊Remote control monitoring for tracking and locating by GPRS
＊Emergency help button set monitoring center
＊Navigation by calling to the monitoring centre
＊Disable/enable oil or electricity by remote control of monitoring centre
＊GPRS Real-time tracking and locating continuously
＊Route play back and reappearance of track
＊SMS response between terminal device and monitoring centre
＊Mileage statistics
＊Over speed alarm / Boundary violation alarm / Electricity cut-off alarm
＊Listen in to the vehicle
＊GPS antenna ON/OFF alarm
＊Compatible with Google map and MapInfo
III Detailed functions
（1）Locating:
Monitoring centre could check the vehicles by plate no, the device terminal will report the place where it is, the monitoring centre will pop up the position of the vehicle automatically.
（2）Timing feedback
Monitoring centre could set the time and sampling.
（3）Enable or disable oil/electricity
The monitoring centre could enable or disable the oil of the vehicle, or recover the oil or electricity after device received the demand.
（4）Emergency help
When urgent cases happen, touch mergency button for 1 second, then alarm starts and transferred to the alarm place. Monitoring center will arrange according to the procedures.
（5）Enter or exit the electronic fence alarm
Center can be set to one or more irregular range if out of the region the alarm will attributes, when the vehicles enter or exit the region set the scope, GPS 58R will be prompted to enter the alarm region, at the same time trigger settings beyond the regional police, the center received alarm information later can be identified and the abolition of the police.
（6）over speed alarm
Monitoring centre set the max speed allowed, it will alarm when over this speed.
（7）Low voltage alarm
When the vehicle terminal detected voltage power lower than 9V and long than 10 seconds, it will alarm because of low voltage.
（8）Electricity disables alarm
When the vehicle terminal's power is cut off, the device terminal will send alarm in 3 seconds, at the same time will powered by emergency battery (2 hours available)
（9）GSM blind zone
When the vehicle terminal located in the GSM blind area, the main device will save the blind point, and will complete the SMS to the monitoring centre when it is normal signal.
（10）Return timing
Control Center can set time interval to let the designated vehicle to feedback data info from time to time.
（11）Track route playback
Control Center can designate vehicle terminal device and set the time to pre-route the track playback, and shows on the map with dynamic display. It can also be derived in accordance with the settled time to playback the track data.
（12）Mileage and Statistics
Data can be saved from the vehicle installed in the car, so monitoring centre could check the mileage data save terminal device, or delete the data in storage, and also, it can also set the time in accordance with the Export-related mileage statistics.
（13）Cut off or recovery the oil/circuit
Control Center can with friendly remote control to disconnect circuit, oil circuit or the circuit to resume vehicles on the designated vehicle, when the car terminal received the command, will recover the oil or electricity supply.
GPS58R GPRS device with smart design, but powerful as well as stability in function.
It combined with GPRS/GSM technology of the function of location, listen in, urgent alarm and monitoring. In advantage of easy install, convenient in operation, good and powerful function; it applies to private cars, government vehicles and renting vehicles, motorcycles.
II Features
＊Remote control monitoring for tracking and locating by GPRS
＊Emergency help button set monitoring center
＊Navigation by calling to the monitoring centre
＊Disable/enable oil or electricity by remote control of monitoring centre
＊GPRS Real-time tracking and locating continuously
＊Route play back and reappearance of track
＊SMS response between terminal device and monitoring centre
＊Mileage statistics
＊Over speed alarm / Boundary violation alarm / Electricity cut-off alarm
＊Listen in to the vehicle
＊GPS antenna ON/OFF alarm
＊Compatible with Google map and MapInfo
III Detailed functions
（1）Locating:
Monitoring centre could check the vehicles by plate no, the device terminal will report the place where it is, the monitoring centre will pop up the position of the vehicle automatically.
（2）Timing feedback
Monitoring centre could set the time and sampling.
（3）Enable or disable oil/electricity
The monitoring centre could enable or disable the oil of the vehicle, or recover the oil or electricity after device received the demand.
（4）Emergency help
When urgent cases happen, touch mergency button for 1 second, then alarm starts and transferred to the alarm place. Monitoring center will arrange according to the procedures.
（5）Enter or exit the electronic fence alarm
Center can be set to one or more irregular range if out of the region the alarm will attributes, when the vehicles enter or exit the region set the scope, GPS 58R will be prompted to enter the alarm region, at the same time trigger settings beyond the regional police, the center received alarm information later can be identified and the abolition of the police.
（6）over speed alarm
Monitoring centre set the max speed allowed, it will alarm when over this speed.
（7）Low voltage alarm
When the vehicle terminal detected voltage power lower than 9V and long than 10 seconds, it will alarm because of low voltage.
（8）Electricity disables alarm
When the vehicle terminal's power is cut off, the device terminal will send alarm in 3 seconds, at the same time will powered by emergency battery (2 hours available)
（9）GSM blind zone
When the vehicle terminal located in the GSM blind area, the main device will save the blind point, and will complete the SMS to the monitoring centre when it is normal signal.
（10）Return timing
Control Center can set time interval to let the designated vehicle to feedback data info from time to time.
（11）Track route playback
Control Center can designate vehicle terminal device and set the time to pre-route the track playback, and shows on the map with dynamic display. It can also be derived in accordance with the settled time to playback the track data.
（12）Mileage and Statistics
Data can be saved from the vehicle installed in the car, so monitoring centre could check the mileage data save terminal device, or delete the data in storage, and also, it can also set the time in accordance with the Export-related mileage statistics.
（13）Cut off or recovery the oil/circuit
Control Center can with friendly remote control to disconnect circuit, oil circuit or the circuit to resume vehicles on the designated vehicle, when the car terminal received the command, will recover the oil or electricity supply.