Fiberglass filter(floor filter;exhaust filter;ground filter;paint stop;spray paint booth filter;overspray arrestor)
Speciality:
1) Made of long fiberglass in non-woven way, large ventilation quantity, small resistance, good efficiency of the dust arrestance for the over-spray;
2) It is applied to the superficial spray coating high quality painting-spray filtration, high dust catching, specially , PA-50/60/PA-100 is suitable for using heat recovery system;
3) High strength fiberglass increasing structure; the windward side is green, the leeward side is white;
4) The low compression performance maintains its outlook, which is completely useful for the filtration fiber to keep the oil mist and the dust;
5) No flammability, heat resistance 170;
6) The compression packing may save the fare and the storage space in the transportation. After decompression, it will regain its original condition;
7) Outer frame may choose the paper frame, the galvanization iron frame, or aluminums alloy frame.
Using:
Thick dust filtration for the general air-conditions system;
Applied to the dry spray painting platform and the exhaust gas system of the automobile spray painting room. It is environment-friendly, reducing the pollution to the environment;
Remark:
Wide variety of sizes and thickness
Specification:
|
Model |
PA-50/60 |
PA-100 |
|
Avg.arrestance(acc.EN779) |
92%-96% |
97%-99% |
|
Initial pressure drop |
15Pa |
20Pa |
|
Final pressure drop |
250Pa |
280Pa |
|
Air velocity |
0.7-1.75m/s |
0.7-1.75m/s |
|
Dust holding at tested final |
3200-3600 g/m2 |
3600-4900g/m2 |
|
Temp.resistance,const(deg) |
170 |
170 |
|
Temp.short peaks(deg) |
190 |
190 |
|
Normal thickness(deg) |
50/60mm |
100mm |
|
MRoll sizes standard(deg) |
0.8*20 1.0*20 2.0*20 |
0.8*20 1.0*20 2.0*20 |