Product Main

Specifications

Hot melt pocket filter;pocket filter;Hot melt filter;air filter;dust filter;bag filter

 

Speciality;

1)Using seamless welding technology, keep structure stability and reduce the risk of leaky make sure the reliabity of use;

2)The media are progressively structured, long service life;

3)There are rhombic and small pockets inside, which not only distribute and share alike the air flow, but also maintain the figure of the pockets, reduce power consumption and make full use of the filter media;

4)There is no glass fiber breakage and the risk of falling, the same breeding conditions caused by micro-organisms.

 

Using:

  Filter for air-condition and ventilation system;

  Thick dust filter (G3, G4), primary filtrate for the filtration system, primary filtrate for the medium filter;

  Thin dust filter (F5, F6), primary filtration for the HEPA filter

 

Remark:

  Based on the customers requirement

 

Specification:

Filtration class

G3

G4

F5

F6

F7

F8

Specifications/Size

Standard element(mm)

 

592*592*550*5P/6P;   592*592*600*5P/6P;   520*520*450*5P

Initial pressure

drop at nominal

(pa)

 

30

 

40

 

50

 

60

 

80

 

120

Nominal volume

(m3/h)

3400

3600

3800

3800

3800

4000

Recommended final pressure

Drop(pa)

 

200

 

 

200

 

250

 

400

 

400

 

400

Average

Arrestance

Ashrae dust(%)

 

85

 

90

 

96

 

98

 

>98

 

>98

Initial efficiency

(%)

50

60

85

93

Dust holding

capacity Ashrae

dust(g)

 

900

 

1850

 

1200

 

1400

 

650

 

500

Moisture resistance

Rel.humidity

100

100

100

100

100

100

Thermal stability

Temporary peaks

80

80

80

80

80

80