Plastic Extruder
Adopt 38CRMOALA high qality material with nitrogen treatment for the scrw , barrrel , module head and so on, so there parts can be used with wear and corrosive resisance .
With larger diameter for screw , guarantee the main performance of sheet with good plasticizing.
For die head , adopt advanced electric or hyduaulic exchanging device for filtering net, sothe operation seems to be simplified
This series extruder is composed of 6parts, extruder part , filter part, die-head part, three rollers part, and traction part, rewinding part.
Extruder part : 1set
Hopper : i set
Output: 135kg/h
Screw dia: 110mm
L/D: 30: 1
Screw & barrel material: 38CRMOALA after nitrogen treatment with optimum hardness, strong corrosion resistance and long use life.
Screw rotate speed: 0-70r. P/min
Speed adjustment : frequency inverter
Drive motor power: 45.OKW
Heating : aluminium-casted heater
Heating power: 15.0kw
Filter part: 1set
Worm-gear case: 1PC
Filter size: 300mm*40mm
Net dia: 3-3.5mm
Heating power: 7.2kw
Net changer: motor changing
Die head part: 1 set
Sheet structure: 1layer
Die head width: 550mm
Finished sheet width: 550
Sheet thickness: 0.3-2mm
Heating mothed: Aluminum -casted heatert
Three roller part: 1set
Roller dia: 345mm
Roller length: 770MM
Rooler no: 3pcs
Roolers reach to "mirror surface"standard
Roller linear speed 0-14m/min
Drive motor: 4.0KW
Rollerpart movement: by motor. 1.1kw
Roller layout way: by level type, each roller arranged side by side
Device for controlling temperature of three roller
Chrilling : it's gyroidal way(not linear way)to cool each rollers as inside roller has many channel
Traction part 1set
Traction roller dia: 160mm
Traction roller length: 750mm
Traction motor power: 2.2kw
Speed adjustment : Frequency inverter
2 set of device for receiving leftover
Winding part 1set
Winding rubber roller: 1 PC
Flat roller: 1 PC
Finished roll max. Dia. 760mm