Visint Vispace 2000 FT-series 10/100M auto-negotiative optical fiber converter is designed for communication broadband IP MAN. It supports full-duplex and half-duplex and has network function that consummates the management according to the customers’ demands. It is the ideal equipment for broadband optical fiber Ethernet and can be widely used in all the solutions for communication MAN broadband IP.
Functional Features:
* Available with the 10/100M, full-duplex and half-duplex auto-negotiative function.
* Support memory duplexer mode and direct mode, memory duplexer mode support the long pack, direct mode has no limitation in the length of pack.
* Support the bandwidth controlling.
* Support LFP(Link Fault Pass-Through) function, detects disconnection in any port automatically and forces the other ports to stop transmission in the link.
* Support remote network management and remote reset, turn on/off the electric interface through remote network management.
* Electric interface has MDI-II and MDI-X automatic cognition function, detect and learn automatically and it is good at compatibility.
* Availability of store-and forward memory buffers can increase the transmission efficiency of high-end receiving equipment effectively, and realize such functions as flow control, broadcast isolation, and error detection.
* Support of IEEE802.1q network features can guarantee the trunk character of most of the mainstream products, such as cross-switch VLAN, TRUNK function and etc.
* Inserting module converter works with internal power single backboard or 2U chassis, support hot-plug.
Support the connecting function of network management module.
Technical Parameter:
|
System Parameter |
Technical Index | |
|
Interface |
Electric interface:RJ45 interface Optical interface: SC/LC/FC/ST interface | |
|
Optical Fiber |
Single-mode/multi-mode optical fiber(optional) | |
|
Standard and Protocol |
IEEE 802.3/ 802.3u Ethernet
IEEE 802.1d Spanning Tree
IEEE 802.1q VLAN TAG
IEEE 802.1p QoS | |
|
Dimensions |
Standalone Optical Fiber Converter with Internal Power |
110（W）×30（H）×140（D） (mm) |
|
Standalone Optical Fiber Converter with External Power |
110（W）×30（H）×140（D） (mm) | |
|
Inserting Card Converter |
25（W）×88（H）×116（D） (mm) | |
|
Environment Requirement |
Operating Temperature |
-10℃ ~ 60℃ |
|
Storage Temperature |
-40℃ ~ 80℃ | |
|
Relative Humidity |
5% ~ 95% (non-condensing) | |
|
Power Supply(Standard) |
220V/AC,50Hz; -48V/DC (optional) | |
|
Safety and EMC |
Compliant with standard of FCC, UL, CE, TUV, CSA | |
|
Consumption |
Chassis (full-insertion) |
< 70W |
|
Standalone |
< 4W | |