r3 point hitch or attach to front end loader THE MAIN TECHNICAL SPECIFICATIONS MODEL RX518FRT RX518PTO RX618FRT RX618PTO Cuting Width 54” 54” 66” 66” Cuting Height 24” 24” 24” 24” Fan No. 4 blades 4 blades 4 blades 4 blades Fan Diameter 18” 18” 18” 18” Auger Diameter 4.8” 4.8” 4.8” 4.8” Drive Fan Hyd w/gearbox Hyd w/gearbox Hyd w/gearbox Hyd w/gearbox Drive auger Gearbox w/chain Gearbox w/chain Gearbox w/chain Gearbox w/chain Hitch Type Front end loader 3-point Cat,1orⅡ Front end loader 3-point Cat,1orⅡ Hitch adjustment FEL quickly move LD PIN 3 position FEL quickly move LD PIN 3 position Chute Deflector Handing/4position/115°-145° Handing/4position/115°-145° Handing/4position/115°-145° Handing/4position/115°-145° Cutting Edge 3/8”X4”Beveled 3/8”X4”Beveled 3/8”X4”Beveled 3/8”X4”Beveled Skid Shoes Cut type adjustable Cut type adjustable Cut type adjustable Cut type adjustable System controls&drive Hyd.Loader sensing block flow PTO w/shear pin Hyd.Loader sensing block flow PTO w/shear pin Hyd.Requirement 6.6-13.2gpm 2000psi min NO 6.6-13.7gpm 2000psi min NO Tractor HP 25-35HP 25-35HP 25-55HP 25-55HP Approx. Weight 700lbs 700lbs 800lbs 800lbs