This machine can swiftly and accurately measure small samples of textiles and is a new type machine jointly developed by our company and Jiangnan University. It is convenient for adjusting parameters, and the samples enjoy the same style as the manufactured products. It is applied to the weaving of test samples of cotton, wool, silk, flax, chemical fiber and blended textile.

2. Technical Parameters and Performance Index of the Machinery

Width: 12 inches, 20 inches, 24 inches

Let-off: Adopting step motor for active elecronic warp introduction(digit display control let-off is option), have two shaft or three shaft choose

Take-up: Adopting step electronic machine for rolling with the weft density range of 10-300 filaments/inch

Shed: 20-page electronic pneumatic-controlled mouth opening facility(including 20-page frames), or 24-pageframes

Color Selection: 8-color electronic pneumatic-controlled weft selection

Beat-up: Adjustable pneumatic beating up. AC seno motor control cam beating up

Weft introducing method: Via pneumatic-controlled single rigid rapier or AC seno motor-controlled

Yarn: 5-500tex

Machine Speed: 35-50rpm

Gas: 0.45-0.75MPa, 0.25L/min(12'), 0.56L/rain(20')

Installation sie: 660*1150*1100mm(L, W, H)(12')

860*1150*1100mm(L, W, H)(20")

3. Central control board

Hardware: P4 C2.4G CPU/256M EMS memory/40G hard disk/mouse/15 inch liquid crystal monitor, S7-200 PLC

Software: WINDOWS2000 Operational System with textile designing software

Installation size: 698*660*1000mm(L, W, H) (12')

698*750*1000mrn(L, W, H)(20')