Our fiber optic patch cord assemblies are CHINA manufactured in an ISO 9001:2000 certified factory using only the highest quality components,From HUBER+SUHNER (ShangHai). Each fiber optic patch cord is fully tested, to Telcordia standards, for insertion loss and back reflection prior to shipment. Single mode fiber optic cable types are also tested for APEX, radius and undercut.  Each fiber optic patch cord is packaged in a sealed plastic bag with cleaning instructions.
Our quality assemblies provide the solution for such protocols as Ethernet, Fibre Channel, Infiniband, ATM and Internet Protocol. Custom colors and lengths of optical fiber available upon request.

Single mode is an optical fiber, with a small core (2-9 microns that supports one mode). The mode Size (standard ie 8.3/125) is stamped on the yellow cable jacket. Singlemode is most commonly usedfor high speed, long distance applications.

Multimode is an optical fiber with a core (25-200 microns) that supports several modes. The core commonly 62.5/125 or 50/125 is stamped on the cable jacket. Always check equipment requirements orthe cable jacket to determine which core Size you need. Multimode is most commonly used for lower speed, short distance applications.

Special PATCH CORD means the connector is not normal one, we can provide the connector include: LX.5 , MU, LSH(E-2000), LSA(DIN), ST-LEAN, ST-HQ, ST-SEC, MR-RJ, FSMA, Most of them are manufactured by HUBER+SUHNER.