『Description』
Adopt aluminum alloy T5 standard lamp holder, matching double color PC tube and aluminum alloy + PC tube. Above picture is whole PC tube with double color. The product could work alone, simple installment and connection.
『Parameters Data』
|
Item No |
Wattage
(W) |
Dimension
(mm) |
LED
(pcs) |
Weight
(kg) |
Luminous Flux(lm) |
Input Voltage(V) |
Work
Frequency |
|
GP-L11RGAF
|
11W |
Φ150mm*1158mm |
171 |
0. 5 |
990 |
AC85-265V |
25KHZ |
|
Work Temperature |
Light source |
Color Rendering
Index |
Light Efficacy |
Static Power Consumption |
Storage Temperature |
Short Circuit
Protection | |
|
-20-65℃ |
Super Brightness LED |
＞75% |
＞85% |
＜0. 15W |
0-65℃ |
OK | |
|
Power
Factor |
Life
span(h) |
Holder |
Drive Position |
Open Protection |
Constant Currency Error |
Microwave/
Noise | |
|
＞90% |
50000 |
G13 |
External |
OK |
＜2% |
＜240mV |
『Performance and Characteristic』
1. LED fluorescent light sources adopt Tai Wan super-high lighting chip and packaging by less
attenuation technology.
2. Driving by constant flow, adopt over electronic flow over voltage protection and radiating
process , which enable the product performance more stable. Useful life is between 50000 to 80000
hours.
3. Input voltage: AC85V-265V, worldwide use and more convenient.
4. Energy saving of LED fluorescent light is reach above 70%. Its life is 10 times of the conventional one,
almost no maintain, without starter and ballast, fast starting , no flashing .
『Illumination Intensity』
|
illumination(LUX)
distance(CM) |
below |
deviated 1M |
deviated 2M |
|
50CM |
714 |
37 |
9 |
|
100CM |
279 |
63 |
16 |
|
150CM |
148 |
65 |
23 |
|
200CM |
94 |
61 |
24 |
|
300CM |
61 |
49 |
30 |
|
Remarks: The above figures are measured based on single transparent lamp pipe 90-degree angle，for reference only. | |||
『Installment Instruction』
Ⅰ. According to the picture representation, install the match length bracket as the tube from the tube vertical direction.
Ⅱ. Intervene the matching power wire to the one side (no positive and negative difference) of the bracket base as the picture shows, make the other side hang, then, connecting AC220V power and would be lighted
Ⅲ. The product could not tear down the light tube only or install other brackets to lighten, it must match our company’s bracket to use.
Ⅳ. This product can’t replace the conventional T5 fluorescent light, non-professional person should not take part the LED tube by your own.
Ⅴ. This product can be used by series after put the two tubes in the bracket. You should buy the special connected line. There were at most 50 pieces in series.
Ⅵ. Don’t separate this product，it’s not in the guarantee . If any error state appears,
please contact with us.
〖After-sale service〗
Any disorder appear under normal operating, we ensure to exchange within 7 days, 3 years guarantee,
life-long maintenance. Any man-made damage and natural disaster is not under warranty.