CJ-25 Tool Blade Cutter This machine is suitable for severing process of die cutting rule. Two sides have lay gauge to adjust and the length is optional. Operation is force-saving and section is straight and smooth. The maximum width of cut is 56mm. CX-25B Tool Blade Make-up Cutter Added dual locations on the base of CX-5A, its operation is more convenient and time-saving. CK-9 Tool Blade Punching Machine This machine is suitable for punching hole at the join point of die-cutting rule and creasing rounded edge. The width of punching hole is9mm.The depth of punching hole is adjustable from 0mm to 25mm Movement is rational and rounded edge will not deform after punching. CX-10M Tool Blade Modeling Cutter CX-10M tool blade modeling cutter is build-for-purpose device for making die cutting plate of adhesive label It can be used to cut and make of all tool mold of adhesive label. QJ-25 Tool Blade Angle Cutter This machine is suitable for serving section of two die-cutting rule during the course of making die cutting plate. The angle of tool tip cut is 15°42’.Two sides have lock gear, so it can form two sharp angles at the same time.