Slave terminal equipment is high bandwidth coaxial-based Ethernet modulation equipment. It is often located in customer port of coaxial network, and uplinks with Master and downlinks with PC or set-top box. It can constitute high-speed interconnected access network or interactive TV network with ability of bidirectional transmission. Its system shares network with CATV and DVB. It adapts to current FHC.
Technical Parameters:
System Parameter
|
Technical Index | |
Standard |
Ethernet IEEE 802.3,IEEE802.3x,IEEE802.3u,IEEE802.1Q,IEEE802.1p | |
Protocol |
CSMA/CA,TDMA(In the Future) | |
Transmission Rate |
200 Mbps | |
Modulation Technology |
DMT multi-carrier wave against noise technology, OFDM 1155 carrier wave, 1024/256/128/64 QAM, QPSK, BPSK | |
Sensitivity of Receiving Transmit Frequency |
≥ -50dBm | |
Wastage of TV Plug |
< 3dBm | |
Safety |
128-bit AES data | |
QoS |
IEEE 802.1 Q (VLAN tagging);ToS (Type of Service)
MAC Address Routing | |
Environment Requirement |
Operating Temperature |
-10℃ ~ 60℃ |
Storage Temperature |
-40℃ ~ 80℃ | |
Relative Humidity |
5% ~ 95% (noncondensing) | |
Consumption |
≤ 5W | |
Power Supply(standard) |
Input : AC180 - 220V/50Hz
Output : DC12V, 800mA |