Characteristics
Energy, pulse width, frequency and facula can be adjusted within a wide range to achieve different welding effects. The parameters are adjusted by the control rod in the sealed cavity, simple and efficient.
Ceramic focusing cavity imported from the U.K. is employed, corrosion resistant, high temperature resistant, efficient in optical/electrical conversion. The focusing cavity's service life is 8 to 10 years, and the service life of the xenon lamp is over 8 million times.
World-leading automatic light shielding system is employed to remove stimulation of light on eyes during operation.
24-hour continuous operation, with stable operating performance, and free from maintenance within 10000 hours.
Personalized design in compliance with ergonomics principles.
Advantages
Fast, efficient, deep, little distortion, little affect area, quality welding, welding points free from pollution, and energy saving.
Characteristics of ML-W120 laser spot welding machine | |
Characteristics Modes |
ML-W120 |
Max.average power |
120W 200W |
Laser wavelength |
1064nm |
Max Pulse energy |
90J 120J |
Laser welding depth |
0.1-3.3mm |
The pulse width |
0.3-20ms |
laser welding frequency |
0.5-20Hz |
Adjusting scope of light spot |
0.2-2mm |
Control system |
Industrial computer |
Power consumption |
≤4kw |
Electrical source |
220V±0%/50Hz/30A |
System composition and environmental requirements system compostion |
Host computer, Cold water tank |
Consumables |
Xenon lamp, filter, protection lens, argon,water,electricity |
Installation environment |
Installation location,above 4 square meters |
environment |
Clear,no dust or less dirt |
Temperature |
55F(13centidegree)to82F(28centidegree) |
Humidity |
5% to 75% No condensation |
Electric power source |
220V50HZ Alternating current,.30A airbrake switch ,voltage stability |