Dispersion rubber & plastic kneader

Model Item X(S)N-20×32 X(S)N-25×32 X(S)N-35×30 X(S)N-55×30 X(S)N-75×30 X(S)N-110×30 X(S)N-150×30

Total volume of mixing chamber L 45 55 75 125 170 250 325

Working volume of mixing chamber L 20 25 35 55 75 110 150

Driving motor power kw 37 37 55 75 110 185 220

Tilting motor power kw 1.5 1.5 2.2 2.2 3 5.5 11

Tilting angle ° 140 140 140 140 140 140 135

Rotating speed of the rotor (front /rear) r/min 32/27 32/27 30/24.5 30/24.5 30/24.5 30/24.5 30/24.5

Pressure of compressed air Mpa 0.6~0.8 0.6~0.8 0.5~0.8 0.6~0.8 0.6~0.8 0.6~0.8 0.6~0.8

Capacity of compressed air m3/min ≥0.7 ≥0.7 ≥0.9 ≥1.0 ≥1.0 ≥1.5 ≥1.0

Pressure of cooling water (rubber mixing) Mpa 0.2~0.4 0.2~0.4 0.3~0.4 0.3~0.4 0.3~0.4 0.3~0.4 0.2~0.4

Pressure of heating steam (plastics mixing) Mpa 0.5~0.8 0.5~0.8 0.5~0.8 0.5~0.8 0.5~0.8 0.5~0.8 0.4~0.8

Overall Dimensions L mm 2675 2675 3200 3230 3325 4075 4250 W mm 1650 1650 1900 1927 2615 2712 2750 H mm 2560 2560 2950 2958 3105 3580 4106

Weight ton 4 4.5 6.3 7.1 9.5 14.9 19.5

Feature

1. An automatic temperature and time control system to provide 100% mixing effect.

2. Easy to clean chamber and change colors.

3. In 6~10 minutes/batch of output equivalent to 2 units of open type rubber mixing mill

4. Pressurized and sealed mixing chamber to provide high mixing performance and prevented environmental pollution

5. Easy installation, operation and maintenance to lower the running cost.

6. The electric control system is controlled by PLC, which has reliable control function, alarm function and interlock safety-protection function.