Main features:
1. The machine adopts double-embossed, gluing compound function.Compared with single embossed sheet it can make the paper more soft and both side of the finished product are same embossed. when using the paper, each layer does not spread apart,especially suit to produce roll kitchen paper,weight alleviates 15% or above if you produce finished products of the same size.
2. Automatic trimming, spraying and sealing at the same time.There no paper losses when the paper roll cutting and packing ,thus it greatly improves the production efficiency and quality.The finished product has trail to facilitate use.
3.Automatic roll change and finished product delivery.
Any specification paper tube or stainless steel pipe betweenφ25 and φ50mm is adjustable within one minutes.High speed rewind with 180-200 meters per minute, namely every 8-12 seconds finish automatic rewinding then sent out each roll. (110mm pitch , section can set 200 in 12 seconds rewinding, trademark embossing function: rewinding finished within 14 seconds .
4. Toilet paper rewinding machine can add fix tail- trimming pressure from trademark device.The device can press characters at 4cm apart from the trimming line ,make the three layers of trimming mouth paper not scattered from each other, and to prevent imitation, especially suit to produce non-embossing roll paper.
5. Toilet paper rewinding machine adopts up-ways receive paper roll, point switch in both home and end to pull the raw paper, which make the operation more easy.
Main technology parameters:
Name |
Total automatic trimming ,spraying ,sealing , punching ,embossing and rewinding machine | ||
Type |
1092 |
1575 |
1760 |
Raw paper size |
Φ1100×1380mm |
Φ1100×1800mm |
Φ1100×2000mm |
Diameter of finished product |
Φ80-Φ150mm |
Φ80-Φ150mm |
Φ80-Φ150mm |
Core pipe size |
Φ30-Φ50mm |
Φ30-Φ50mm |
Φ30-Φ50mm |
Embossing |
Single embossing, double-embossed , steel to steel embossing (To be ordered.) | ||
Bottom embossing roller |
Felt roller, wool roller, polyurethane rubber roller (To be ordered.) | ||
braking |
Electronic, pressure controller | ||
Programming controller |
PLC | ||
Mechanical transmission |
The case of infinitely variable speeds and the machine not adopts belt-conveyor , which can guarantee the accuracy of pitch and length of finished product. | ||
Speed |
180-200 m/ min |
180-200 m / min |
180-200 m / min |
Main transmission |
The generator of frequency control, power 5.5kw, 7.5kw and 11kw | ||
Model |
1.4 meters, 1.8 meters, 2.05 meters, 2.5 meters | ||
SizeL×W×H |
5500×2100×1450mm |
5500×2500×1450mm |
5500×2900×1450mm |
Weight |
3500kg |
4000kg |
4500kg |