St01 Silicone Extruder
Functions and Features:
1. It is composed of raw material pump, solidification pharmaceutical pump, proportional pump, sealant-mixture system, hydraulic pressure system, electronic system and so on.
2. Raw material pump, solidification pharmaceutical pump and proportional pump adopt the special high-pressure filling pump and the material can be supported equivalently in two-way. The raw material pump is compelled by the hydraulic pressure system while the solidification pharmaceutical pump is compelled by the pneumatic motor.
3. There are high-pressure valves in the underpart entrance of solidification pharmaceutical filter and material-feeding place of the mixing device and one-way valve is set in the nixing device so as to prevent two-components from fleeing each other.
4. Rising and falling system is controlled by hand valve and the proportion of the two-components can be changed by adjusting the slipper in the swinging pole. Tightening the nut once the demanding scale is reached.
Technique parameter:
Mixing ration proportion of mixture 6:1-14:1
Raw material barrel 55galon(200L)
Solidification pharmaceutical barrel 5galon(20L)
Max.air-consumption volume 0.5m3/min
Max. squeeze pressure 20Mpa
Air source pressure 0.5-0.8Mpa