Pure sine wave inverter

Input wave: pure sine

Nominal voltage: 120V/220V

Low voltage trip:90V±4% 184V/154V ± 4%

Low voltage re engage:100V±4% 194V/164V± 4%

High voltage trip:140V±4% 253v± 4%

High voltage re engage:135V±4% 243v ± 4%

Max input AC voltage: 150 VAC 270VAC

Norninal input frequency:50 Hz OR 60 Hz(Auto Detect)

Low frequency trip: 47 Hz for 50 Hz, 57Hz for 60Hz

High frequency trip: 55 Hz for 50 Hz, 65Hz for 60Hz

Output wave form:(bypass mode) same as input.

Over load protection: Circuit breaker

Short circuit protecion: circuit breaker

Transfer switch rating: 30Amp or 40 amp

Efficiency online transfer mode: 95% +

Line transfer time:10ms typical

Bypass without battery connected: Yes

Max bypass current: 30 amp or 40 amp

Bypass over current: 35 amp or 45 amp alarm

Output continuos power watts:2000w

Output continuos power VA:2000

Power factor:09-1.0

Output frequencey: 50 Hz ± 0.3 HZ or 60 hz± 0.3 HZ

Norninal effeciency: 88%

Surge rating:6000W

Inverter specification:

Nonimal input voltage:12V/24V/48V

Minimum start Voltage: 10V/20V/40V

Low battery alarm;10.5V/21V/42V

Low battery trip: 10V/20V/40V

High voltage alarm:16V/32V/64V

Power saver: Below 25 watt when enabled

Power saver: same switched on/off on remote

Charger specification:

Input voltage range: 95-127VAC, 194-243VAC / 164-243VAC(W)

Output Voltage: Dependent on battery type

Battery Initial voltage for start up:0-15.7V for 12V ( *2 for 24V;*4 for 48V)

Over charge protection shut down:15.7V for 12V ( *2 for 24V;*4 for 48V)

Charge curves:(4 stage constant current) battery type: 4 Step digital controlled progressive charge.