Pure sine wave inverter

Input wave: pure sine

Nominal voltage: 120V/220V

Low voltage trip: 90V±4% 184V/154V ± 4%

Low voltage re engage: 100V±4% 194V/164V± 4%

High voltage trip: 140V±4% 253v± 4%

High voltage re engage: 135V±4% 243v ± 4%

Max input AC voltage: 150 VAC 270VAC

Norninal input frequency: 50 Hz OR 60 Hz(Auto Detect)

Low frequency trip: 47 Hz for 50 Hz, 57Hz for 60Hz

High frequency trip: 55 Hz for 50 Hz, 65Hz for 60Hz

Output wave form: (bypass mode) same as input.

Over load protection: Circuit breaker

Short circuit protecion: circuit breaker

Transfer switch rating: 30Amp or 40 amp

Efficiency online transfer mode: 95% +

Line transfer time: 10ms typical

Bypass without battery connected: Yes

Max bypass current: 30 amp or 40 amp

Bypass over current: 35 amp or 45 amp alarm

Output continuos power watts: 2000w

Output continuos power VA: 2000

Power factor: 09-1. 0

Output frequencey: 50 Hz ± 0. 3 HZ or 60 hz± 0. 3 HZ

Norninal effeciency: 88%

Surge rating: 6000W

Inverter specification:

Nonimal input voltage: 12V/24V/48V

Minimum start Voltage: 10V/20V/40V

Low battery alarm; 10. 5V/21V/42V

Low battery trip: 10V/20V/40V

High voltage alarm: 16V/32V/64V

Power saver: Below 25 watt when enabled

Power saver: same switched on/off on remote

Charger specification:

Input voltage range: 95-127VAC, 194-243VAC / 164-243VAC(W)

Output Voltage: Dependent on battery type

Battery Initial voltage for start up: 0-15. 7V for 12V ( *2 for 24V; *4 for 48V)

Over charge protection shut down: 15. 7V for 12V ( *2 for 24V; *4 for 48V)

Charge curves: (4 stage constant current) battery type: 4 Step digital controlled progressive charge.