Switching power supply :

 

S-50-5S-50-12S-50-15S-50-24

Model
Specification
DC output voltage	5V	12V	15V	24V
Output voltage errorNote2	±2%	±1%	±1%	±1%
Rated output current	10A	4.2A	3.4A	2.1A
Output current rage	0-10A	0-4.2A	0-3.4A	0-2.1A
Wave and noise(Note 3	75mVp-p	100mVp-p	100mVp-p	100mVp-p
Inlet stability(Note 4	±0.5%	±0.5%	±0.5%	±0.5%
Load stablity (Note 5	±1%	±0.5%	±0.5%	±0.5%
DC output power	50W	50.4W	51W	50.4W
Efficiency	75%	78%	78%	82%
Adjustable range for DC voltage	+10,-5%	±10%	±10%	±10%
AC input voltage range	AC100~240V 47~63Hz;240~370VDC
Input current	1.3A/115V 0.65A/230V
AC INnrush current	Cold-start current 18A/115V 36A/230V
Leakage current	<0.5mA/240VAC
Overload proctection	105%~150% Tpye:Foldback current limiting Reset: auto recovery
Over-voltage protection
High-temperature protection
Temperature coefficient	±0.03%/(0~50%)
Setup rise hold up time	200s,100ms,30ms
Vibration	10~500Hz,2G 10min,/1cycle,Period for 60min,each axes
Withstand voltage	Input and output internal1.5KVAC,Input and enclosure1.5KVAC,Output and enclosure0.5KVAC
Isolation resistance	Input and output internal:Input and enclosure,Output and enclosure500VDC/100MΩ
Working temperature and humidity	-10~+60Refer to output derating curve,20%~90%RH
Store temperature and humidity	-20~+85,10%~95%RH
Overall dimension	100×58×32mm
Weight	0.5Kgs
Safety standards	Meet UL1012 requirement(Not qpply for the mark)
EMC standards
Note 1.The testing condition for the paramenter above is :230VAC input,rated load,2570% RH.Humidity. 2.Error.Include the setting error,line stability and load stability.(Note:5). 3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting. 4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. 5.Load stability test:the load is from 0% to 100%.