Product Main

Specifications

Weaving patterns:plain or twill woven

Materials:304;304L;316;316L,etc

Width:1m-48"

Length:30m-100"

Stainless Steel Square Wire Mesh is classified into two types according to the weaving patterns:plain woven and twill woven Plain weave is the most commonly used weave. Each warp wire crosses alternately above and below each weft wire. Warp and weft wires generally have the same diameter. Twill Weave Stainless Steel Wire Mesh is made by each weft wire passing alternately over two, and then under two successive warp wires and each warp wire passing alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter. Materials:304,304L,316,316L,etc

Uses:Stainless steel wire mesh and stainless steel wire cloth products are widely used in petroleum, chemical industry, environment protection, mine, airspace, paper-making,electronic, metallurgy etc.

Wire Mesh Sizes;

Standard roll width : 1m to 48"

Standard roll length : 30m to 100"

Special size and specification are available according to customers' requirement.

Specification List of Stainless Steel Wire Mesh Mesh/Inch Wire Diameter(mm) Aperture (mm) Filtration Area% Mesh/Inch Wire Diameter(mm) Aperture (mm) Filtration Area% 2 1.60 11.10 76 80 0.13 0.187 35 3 1.60 6.87 66 100/90 0.10 0.167 39 4 1.60 4.75 56 100 0.10 0.154 37 5 1.00 4.08 64 100 0.11 0.144 32 6 0.90 3.33 62 120 0.09 0.122 33 8 0.90 2.28 51 120 0.08 0.132 39 8 0.70 2.47 61 150 0.065 0.104 38 10 0.50 2.04 64 200 0.05 0.077 37 12 0.50 1.62 59 200 0.04 0.084 47 14 0.50 0.50 52 250 0.04 0.062 37 16 0.35 1.24 61 250 0.035 0.067 43 18 0.28 1.13 64 250 0.03 0.072 50 20 0.35 0.92 52 300 0.04 0.045 28 24 0.35 0.71 45 300 0.03 0.055 42 28 0.35 0.56 38 325 0.035 0.043 30 30 0.28 0.57 45 325 0.028 0.050 41 40 0.22 0.42 43 400 0.030 0.034 28 50 0.18 0.33 42 400 0.023 0.042 43 60 0.16 0.26 39 508 0.025 0.025 26 70 0.14 0.223 38